Servidor MCP de DNS Doctor

• Nombre en el registrodev.dnsdoctor/dns-doctorverificado en el registro MCP

El nombre en el registro está bajo dnsdoctor.dev. El registro solo permite usar ese espacio de nombres a quien demuestra control del dominio por DNS o HTTP.

• Estadorespondecomprobado el 2026-10-21
• Herramientas27
• El servidor se llamadns-doctor
• Versión del servidor1.14.0
• Versión del protocolo2025-06-18

El 2026-10-21 el servidor respondió a initialize y tools/list sin iniciar sesión. Primera respuesta en 748 ms.

• Aún no se ha juzgado si sus herramientas hacen el trabajo del producto.
• Comprobado 6 de los 7 días necesarios para juzgar su fiabilidad.

Lo dicen reglas a partir de las mediciones de arriba. La primera llamada probable la elige un modelo de la lista de herramientas; lee su descripción antes de fiarte.

• Nota INITE MCPtras una semanala nota necesita 7 comprobaciones diarias: 6 hasta ahora
• Uso251 descargas en npm por semana2 estrellas en GitHub
• Respondiómidiendo6 de las 7 comprobaciones diarias necesarias para mostrar el porcentaje
• Mediana de la primera respuesta635 ms
• Espacio en el contexto del agente≈ 10.403 tokenslas definiciones de todas sus herramientas (27), que el agente lleva en cada turno
• Definiciones de herramientasA · 100 de 100
• Resultados tipados27 de 27 herramientasdeclaran outputSchema: el resultado llega tipado y se lee de una vez

• Todas las herramientas pasan las seis comprobaciones.

Un programa comprueba el servidor una vez al día: initialize y tools/list, sin modelo. Los tokens son la longitud de las definiciones, a unos cuatro caracteres por token. La nota promedia seis comprobaciones del nombre, la descripción, el esquema y las anotaciones de cada herramienta; dice lo bien descritas que están, no si funcionan. La nota pondera solo lo medido: si responde (30%), si hace el trabajo del producto (25%), definiciones (20%), contexto (10%) y uso (15%). Lo que no se midió queda fuera, y una instrucción oculta limita la nota a 40. El estado de los servidores MCP de los proveedores: método y números →

• scan_domain

  Use this when the user asks to check, audit, diagnose or troubleshoot SPF, DKIM, DMARC, email authentication, email deliverability DNS, why their mail lands in spam, MX, DNS health, blacklist status, or domain/SSL expiry for a domain, or…

• get_report

  Use this for the same questions as scan_domain when a recent report is enough (the cheap first look); use scan_domain when the state must be re-read now. Return the stored report for a domain, scanning once only if none exists yet — the…

• build_dmarc_upgrade

  Use this when the user asks how to move DMARC on from p=none, whether it is safe to tighten DMARC, or what the next DMARC policy step is for a domain (a scan can justify quarantine at most; reject needs monitoring evidence) — and after…

• start_monitoring_signup

  Use this when the user asks for ongoing DMARC monitoring, RUA report monitoring, new-sender monitoring, email-authentication alerts or ongoing DNS monitoring of a domain they own. Returns signup_url, a link to a dnsdoctor.dev page that…

• count_spf_lookups

  Use this when the user asks about SPF 'too many lookups', the 10-lookup limit, an SPF PermError, or whether an SPF record is valid. Validate an SPF record and count what it costs. Returns `record_valid` (the record parses as RFC 7208…

• validate_dmarc_record

  Use this when the user pastes a DMARC record and asks whether it is valid, correct or safe. Validate a pasted DMARC record: parsed tags, level'd findings, and whether it is valid. No DNS lookup — pass the record string itself…

• generate_dmarc_record

  Use this when the user asks to create, generate or write a DMARC record for a domain that has none. Build a DMARC record from scratch for a domain that has none, using a validating engine — never compose one yourself. `policy` is…

• check_dkim_selector

  Use this when the user asks whether DKIM is set up for a sending platform, whether a specific selector exists, or why DKIM fails. Check ONE specific DKIM selector on a domain — the exact selector the sending platform uses (e.g. `google`…

• parse_dmarc_report

  Use this when the user uploads or pastes a DMARC aggregate (RUA) XML report and asks what it says. Parse ONE DMARC aggregate (RUA) report into readable per-source aggregates: who sent mail as the domain, how much, and what share was…

• check_record

  Use this when the user asks whether a DNS change has landed, wants a DNS record looked up, or wants to verify a record they just published — or whenever answering needs the live value of a record. Reads the record from the domain's OWN…

• check_reverse_dns

  Use this when the user asks about reverse DNS, PTR records, or FCrDNS for a mail server IP. Check one sending IP's forward-confirmed reverse DNS (FCrDNS): reads the IP's PTR record, then resolves that hostname back and reports whether it…

• audit_spf_includes

  Use this when the user asks who can send email as their domain through SPF includes, or wants an SPF supply-chain or third-party sender audit. Audit a domain's SPF supply chain: walks every include and redirect it delegates to, and…

• build_parked_domain_records

  Use this when the user asks how to protect a domain that sends no email from being spoofed. Build the three-record hardening pack that makes a NON-SENDING domain unusable for spoofing: a Null MX, a hard-fail SPF record, and a p=reject…

• check_propagation

  Use this when the user asks whether a DNS change has propagated globally, or why a record shows in one place and not another. Check whether a DNS change has propagated GLOBALLY: six vantage points (five owner-run probes across four…

• lookup_registration

  Use this when the user asks who owns a domain, when it expires, which registrar or nameservers it has, whether it is registered, or whether a transfer or delete lock is set — the WHOIS question. Read a domain's registration from the…

• get_alerts

  Use this when a signed-in operator asks what changed on a monitored domain, or what the monitoring has flagged. Read the monitoring alert log for the domains the caller's account monitors, newest first. Requires an API token. Each row…

• get_readiness

  Use this when a signed-in operator asks whether a monitored domain is ready for the next DMARC step. Read the DMARC enforcement-readiness verdict for ONE domain the caller's account monitors, computed from its aggregate (RUA) report…

• list_my_domains

  Use this when a signed-in operator asks which domains their DNS Doctor account monitors, or what to do next on them. Lists every domain on the caller's account with its state — verified, pending (added, ownership not proven yet) or…

• check_lookalikes

  Use this when the user asks about lookalike, look-alike, typosquat or impersonation domains of their domain, or whether someone has registered a name close to theirs. DNS-only: checks the closest variants of the name and returns facts…

• get_lookalikes

  Use this when a signed-in operator asks which lookalike domains of a monitored domain the watch has found, how risky they are, or for one's takedown evidence. Requires an API token with monitoring:read. Returns the account's watched…

• start_email_test

  Use this when the user wants to know how a real email from them actually authenticates — whether a message from Google Workspace, Microsoft 365, a newsletter tool or an app is SPF/DKIM/DMARC aligned, why it lands in spam, or to prove DKIM…

• get_email_test

  Use this after start_email_test, once the user says they sent the email. Returns status pending | received | expired | error. pending means the message has not arrived (or is still being checked): ask the user to send it if they have not…

• list_email_tests

  Use this when a signed-in user asks about email tests they ran before, or how a sender's earlier tests scored. Requires an API token with monitoring:read. Returns the account's own tests, newest first (optionally only those whose From…

• check_bimi

  Use this when the user asks how to get their logo shown in Gmail, Yahoo, Apple Mail or other inboxes (BIMI), whether their BIMI setup works, or why their logo does not show. A live read of one host's BIMI setup: the DMARC gate (BIMI needs…

• add_monitored_domain

  Add a domain to the signed-in user's DNS Doctor monitoring and return the ownership-check TXT record they must publish, plus where their DNS is hosted, a provider-specific guide link and, when their provider supports it, a one-click apply…

• check_domain_verification

  Use this only for DNS Doctor's own ownership TXT challenge on a domain the user already added to their DNS Doctor account (add_monitored_domain). For a TXT record another service asked for (Google Workspace, Microsoft 365, Shopify or any…

• get_domain_records

  Read the records a domain the user monitors still needs: the ownership check while it is unverified, and once verified the DMARC reporting record plus whether we have OBSERVED that record published. Read-only: it issues nothing — if a…