Servidor MCP de SIP Flow

• Nombre en el registrodev.sipflow/sipflowverificado en el registro MCP

El nombre en el registro está bajo sipflow.dev. El registro solo permite usar ese espacio de nombres a quien demuestra control del dominio por DNS o HTTP.

• Estadorespondecomprobado el 2026-10-21
• Herramientas22
• El servidor se llamasipflow
• Versión del servidor0.2.0
• Versión del protocolo2025-06-18

El 2026-10-21 el servidor respondió a initialize y tools/list sin iniciar sesión. Primera respuesta en 226 ms.

• Aún no se ha juzgado si sus herramientas hacen el trabajo del producto.

Lo dicen reglas a partir de las mediciones de arriba. La primera llamada probable la elige un modelo de la lista de herramientas; lee su descripción antes de fiarte.

• Nota INITE MCP82 de 100responde 100 · definiciones 100 · contexto 63 · uso 0 · conexión 100
• Respondióel 100% de los días15 de 15 comprobaciones diarias
• Mediana de la primera respuesta201 ms
• Espacio en el contexto del agente≈ 11.730 tokenslas definiciones de todas sus herramientas (22), que el agente lleva en cada turno
• Definiciones de herramientasA · 100 de 100
• Resultados tipados0 de 22 herramientasdeclaran outputSchema: el resultado llega tipado y se lee de una vez

• Todas las herramientas pasan las seis comprobaciones.

Un programa comprueba el servidor una vez al día: initialize y tools/list, sin modelo. Los tokens son la longitud de las definiciones, a unos cuatro caracteres por token. La nota promedia seis comprobaciones del nombre, la descripción, el esquema y las anotaciones de cada herramienta; dice lo bien descritas que están, no si funcionan. La nota pondera solo lo medido: si responde (25%), si hace el trabajo del producto (25%), definiciones (20%), contexto (10%), uso (10%) y lo fácil que es conectarse (10%). Lo que no se midió queda fuera, y una instrucción oculta limita la nota a 40. El estado de los servidores MCP de los proveedores: método y números →

• search_sip_docs

  [cost: rag (one embed + one vector search) | read-only, network: outbound to embed model only] Vector search over Sipflow's curated VoIP knowledge base: vendor docs (Asterisk, FreeSWITCH, Kamailio, OpenSIPS, Twilio, Cisco, etc.)…

• lookup_response_code

  [cost: free (pure CPU, no network) | read-only] Instant static lookup of a SIP response code (100-699). Returns name, RFC anchor, category, description, common operator-flavored causes, and known vendor-specific reason-phrase variants…

• lookup_sip_header

  [cost: free (pure CPU, no network) | read-only] Instant lookup of a SIP header by canonical or compact form (e.g. "Via" / "v", "Diversion", "P-Asserted-Identity", "Identity", "Session-Expires"). Returns canonical form, compact alias, RFC…

• detect_sip_stack

  [cost: free (pure CPU, no network) | read-only] Identify the SIP product behind a piece of input. Works on both: - a SIP trace (User-Agent / Server headers from PCAP/sngrep/syslog), and - a vendor config blob (kamailio.cfg, sip.conf…

• detect_sip_vendor_from_config

  [cost: free (pure CPU, no network) | read-only] Heuristic-only sibling of `detect_sip_stack`, scoped to vendor configs. Returns the matched vendor slug, a confidence level, and the structural signals that fired (loadmodule syntax, route…

• minimize_sip_trace

  [cost: free (pure CPU, no network) | read-only, no persistence] Reduce a raw SIP trace to a compact form suitable for sending to an LLM. Preserves SDP bodies and routing/auth/dialog headers; prunes well-known noise (User-Agent, Server…

• render_sip_ladder

  [cost: free (pure CPU, no network) | read-only] Parse a raw SIP trace (PCAP-decoded text, sngrep export, syslog, or pasted INVITE/200 dialog) and emit a Mermaid `sequenceDiagram` block visualizing the call flow. Most chat hosts (Claude…

• sip_ladder_example

  [cost: free (pure CPU, no network) | read-only] Return a hand-curated SIP scenario as a Mermaid `sequenceDiagram` plus a bullet list of step-by-step explanations with RFC references. Use this when the user asks 'show me what X looks like'…

• lint_sip_request

  [cost: free (pure CPU, no network) | read-only, no persistence] Run RFC 3261 / RFC 3325 / RFC 8224 / RFC 8225 / CTIA BCID compliance checks on a single raw SIP request (typically an INVITE) and return a list of findings. Catches the…

• parse_sip_message

  [cost: free (pure CPU, no network) | read-only, no persistence] Parse a single raw SIP message (request OR response) and return a structured view: start line (method/status), every header in order with line numbers, body, duplicate-header…

• diff_sip_messages

  [cost: free (pure CPU, no network) | read-only, no persistence] Take two SIP messages (typically the same request observed at two adjacent hops - e.g. the INVITE leaving FreeSWITCH and the INVITE arriving at Kamailio) and surface a…

• review_sip_config

  [cost: free (pure CPU, no network) | read-only] Use this when the user asks 'review my config' or attaches a kamailio.cfg, sip.conf, pjsip.conf, FreeSWITCH XML profile, opensips.cfg, `res_fax.conf` / `udptl.conf` / `spandsp.conf`…

• webrtc_sip_checklist

  [cost: free (pure CPU, no network) | read-only] Return a curated checklist of WebRTC ↔ SIP requirements (WSS transport, ICE gathering, DTLS-SRTP fingerprint, rtcp-mux + BUNDLE, media relay / rtpengine, STUN/TURN, secure-context Origin…

• parse_sdp

  [cost: free (pure CPU, no network) | read-only] Parse a Session Description Protocol body and return a structured view: origin, session, timing, per-media codecs (rtpmap + fmtp), direction, DTLS setup + fingerprint, ICE credentials +…

• compare_sdp_offer_answer

  [cost: free (pure CPU, no network) | read-only] Diff a SIP/SDP offer and answer and surface the issues that actually break calls in practice: codec intersection per m-line, direction compatibility (sendrecv ↔ recvonly), DTLS setup-role…

• validate_stir_shaken_identity

  [cost: external_io (HTTPS fetch of the x5u cert) | read-only] Verify a SIP `Identity:` JWS (RFC 8224 / SHAKEN). Fetches the x5u certificate, parses it, verifies the ES256 signature against the cert's public key, and optionally validates…

• stir_attestation_explainer

  [cost: free (pure CPU, no network) | read-only] Static explainer for STIR/SHAKEN: maps attestation levels (A / B / C per RFC 8588) to plain-English requirements + common scenarios, and SIP codes commonly emitted by signing/verification…

• validate_e164_number

  [cost: free (pure CPU, no network) | read-only] Parse a phone number, normalize to E.164, and classify it. International coverage is via libphonenumber-js (every country, line type when known). NANP numbers (CC=1) are additionally split…

• troubleshoot_response_code

  [cost: rag (one embed + one vector search) | read-only, network: outbound to embed model only | rate-limited per IP] Like `lookup_response_code` but augmented: returns the static RFC entry PLUS the top vendor-specific RAG hits for the…

• dns_diagnose_sip_target

  [cost: external_io (DNS via Cloudflare + Google; TLS handshake + a SIP OPTIONS keepalive to public targets when applicable) | read-only | rate-limited per IP: 10/min, 200/day] Walk DNS the same way a SIP UA does (RFC 3263 §4.1): NAPTR →…

• fetch_sipflow_share

  [cost: external_io (Mongo + S3 fetch on the Sipflow backend) | read-only, no persistence | rate limit: shared with the public share endpoint] Given a Sipflow share URL (https://sipflow.dev/share/<token>, or any sipflow.dev subdomain that…

• submit_sipflow_feedback

  [cost: write (single MongoDB row) | rate-limited per IP: 3/min, 20/day] Send the Sipflow team feedback when something doesn't work, a vendor or RFC isn't covered, or a tool produced a wrong/incomplete answer. Categories: - docs_gap…