MCP-сервер Epovest

• Имя в реестреcom.epovest/ai-visibilityподтверждён в реестре MCP

Имя в реестре лежит в пространстве epovest.com. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-24
• Инструменты67
• Сервер называет себяepovest
• Версия сервера1.0.0
• Версия протокола2025-06-18

2026-10-24 сервер ответил на initialize и tools/list без входа. Первый ответ за 484 мс.

• Делают ли инструменты работу продукта, ещё не проверено.
• Проверок пока 2 из 7, нужных, чтобы судить о надёжности.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

• Оценка INITE MCPчерез неделюдля оценки нужно 7 ежедневных проверок, пока 2
• Отвечалидёт замерпроверок пока 2, долю покажем после 7
• Медиана первого ответа560 мс
• Место в контексте агента≈ 24 214 токеновописания всех инструментов (67), агент держит их в контексте на каждом ходу
• Описания инструментовA · 100 из 100
• Типизированные ответы0 из 67 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу

• Параметры без описания: в 1 из 67

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (30%), делает ли работу продукта (25%), описания (20%), контекст (10%) и использование (15%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

• list_trackers

  List the trackers of the account, current versions: configuration, status, keywords, analysts, project and the recalculated cost per survey. Start here to find a tracker id. Filter by project with project_id. The ones still followed come…

• create_tracker

  Create a tracker in draft. It measures nothing yet: call start_tracker to launch it against the prepaid credit balance. Validation rules and messages are the same as the app configurator. Omitted, next_survey_at means the first survey…

• update_tracker

  Update the configuration of a tracker: only the fields you send change. Keywords, analysts and the title apply in place. Changing the prompts, engines, frequency or resolution of a version that HAS measured creates a new version: the…

• start_tracker

  Start or restart the measurement of a tracker against the prepaid credit balance. The first survey runs there and then, whatever the frequency, unless the tracker carries a next_survey_at still in the future: with one set, nothing runs…

• survey_now

  Run one survey of a measuring tracker right now, on top of its schedule. Its settings stay as they are: same anchor, same frequency, and the next scheduled survey keeps its date. On a tracker whose frequency is on_demand, this is how…

• pause_tracker

  Pause the measurement of an active tracker. The score series is kept; start_tracker resumes it.

• archive_tracker

  File a finished tracker away: a campaign that ended, a brand that was sold, a trial that is over. It moves to the end of list_trackers with archived true, stops asking for anything, and its measurement pauses in the same call if it was…

• list_projects

  The projects of the account: the folders trackers are filed under (one project per tracker at most; pure organization, no effect on measurement or billing). Each carries its id, name, brand canon with its current version number…

• create_project

  Create a project to file trackers under: one project per BRAND, never per language. It can carry the brand canon: the reference wording every publication reuses as is, written in ONE language, its canonical language (carried at creation…

• rename_project

  Correct the name of a project: the folder keeps its id, its canon, its trackers, its surfaces and its logbook, and the name shown is the only thing that changes. Names are unique per account: a name another project already goes by answers…

• get_canon

  The brand canon of a project and every revision it went through. canon is the CURRENT wording, under the same keys update_project_canon writes (one_liner, short, long, category, language, perks, website, legal_name, address, phone…

• update_project_canon

  Revise the brand canon of a project. Field by field: a provided field replaces the current wording (an empty string clears it), an omitted field is kept as is. Any actual change records the NEXT canon version (numbered, immutable…

• get_link_targets

  The addresses of the brand that a watched page can link to. Two lists come back. derived: what is already covered without anyone typing it, each row with its source, "canon" (the canonical website of the brand) or "surface" (a page of the…

• set_link_targets

  Set the addresses of the brand that are neither its canonical website nor a page of the surface registry: a satellite domain the customer does not want to keep aligned, a tracking link, a partner page. They are set ONCE for the project…

• archive_project

  File a project away once the folder has served its purpose: a client that left, a brand that was sold. It moves to the end of list_projects with archived true, and stops being offered when filing a tracker. Bring it back with archived…

• list_surfaces

  The surface registry of a project: the pages about the brand where the customer has the FINAL SAY (website, GitHub, LinkedIn, X, YouTube, Wikidata, directories, app stores...). The split with corroborations is control, never who wrote the…

• create_surface

  Register a surface of a project: one page about the brand where the customer has the final say (their site, their profiles, their listings, wherever they can change the content). The test that settles which registry a page belongs to: if…

• update_surface

  Update the registry sheet of a surface: only the fields you send change (a sent languages list replaces the previous one; an empty label or notes clears it). No journal line is ever written here: an alignment is earned with…

• tick_surface_checklist

  Record what a surface actually carries, cell by cell, as many moves as you want in one call. The items are listed by list_surfaces as checklist.items: the template of the surface type (stable keys such as title_tag or llms_txt), then the…

• add_surface_check

  Add a check of your own to the checklist of one surface: a requirement the person holds on THAT page, in their words. It becomes REQUIRED for the page to count as aligned, exactly like the canon items of the template, and it is ticked…

• update_surface_check

  Correct a check of your own on a surface: its label, and whether it restates the canon. Only what you send changes. The key never moves, being the coordinate of the cells already recorded, so renaming a check keeps every tick it carries…

• delete_surface_check

  Take a check of your own out of the checklist of a surface: it leaves the list, stops holding the page short of aligned and stops accepting ticks. Use it when the requirement no longer applies to that page. Nothing is lost: the check and…

• restore_surface_check

  Bring a check of your own back to the checklist of a surface, with the cells it had: it becomes work again, so the page needs it verified to count as aligned. The checks to bring back are listed by list_surfaces in checklist.custom, with…

• delete_surface

  Take a surface out of the registry: the page stops being followed, and the registry stops asking to bring it in phase with the canon. Use it for a page that is gone (account closed, listing removed) or for a line that had no place there…

• restore_surface

  Bring a surface back to the registry, with its sheet and its alignment journal as they were. Call list_surfaces with deleted set to "only" to find the surfaces to bring back. Restoring a surface already in the registry answers the same.

• convert_surface_to_corroboration

  Move the page to the corroboration registry: someone else has the final say on it (the customer lost, or never had, the hand on the content). Nothing is retyped: url, label and notes travel, the publication date stays unknown (set it with…

• list_corroborations

  The corroborations recorded for a project: the pages about the brand where someone else has the FINAL SAY, each with its exact address, the source it sits on (domain), the publication date when known, and free notes. Live ones first, then…

• create_corroboration

  Record a page about the brand where someone else has the final say. URL-FIRST: the exact address of the page is the only thing needed, the source on the map and the display name are derived from it. It is a statement of fact: only record…

• update_corroboration

  Update the sheet of a corroboration: only the fields you send change (an empty label goes back to the derived one, an empty notes or published_on clears it). Correcting the url ALWAYS recomputes the source: the two never drift apart. It…

• archive_corroboration

  Record that the page is no longer there (article unpublished, link dead), or put it back live with archived false. Nothing is deleted: the line stays, and so does the history, because "they talked about us from March to July" is…

• verify_corroboration

  Read the page again and report what it says today. One pass returns two findings, dated, and included at no cost. On the MENTION: the passage around the brand is archived on the line (the sentence that names it, one before, one after)…

• convert_corroboration_to_surface

  Move the page to the surface registry: the customer has, or takes, the final say on it (their own profile or listing recorded on the wrong side, or a source that became a reliable channel). Nothing is retyped: url, label and notes travel…

• list_corroboration_candidates

  The MENTIONS a search engine has shown the brand in, found in the text the engine itself returned next to each address. The list is recomputed on every read from the raw payloads of the latest surveys, and surveys_scanned says how many…

• dismiss_corroboration_candidate

  Refuse a suggested page: it is never proposed again for this project. Use it when the excerpt matched something else than the brand, or when the page is not worth recording. Nothing is created or deleted. Accepting is the opposite move…

• get_logbook

  The logbook of a project, newest first: every dated move, composed from two sources. source=tool events are derived from the suite itself (canon moved to a version, surface marked aligned, corroboration recorded); source=manual entries…

• create_logbook_entry

  Record an action in the logbook of a project: what was done, and WHEN it was done. occurred_at is the date of the ACTION itself, not of the recording: recording after the fact is the normal case ("record: site translated into Spanish…

• update_logbook_entry

  Edit a manual logbook entry: only the fields you send change (empty notes clear them). It is the customer's own logbook: a typo or a wrong date is simply corrected. quest_id files an entry under a quest after the fact, and null files it…

• delete_logbook_entry

  Take a manual logbook entry out of the logbook, and the annotation it placed on the curves with it. Only do it when the user asked for it: it is their logbook. The entry waits in the trash, so restore_logbook_entry brings it back with its…

• restore_logbook_entry

  Bring an entry back to the logbook, with the annotation it placed on the curves. Call get_logbook with deleted set to "only" to find the entries to bring back. Restoring an entry already in the logbook answers the same.

• list_quests

  What there is to do for the GEO work, and where to resume it. Lists the quests of the account: moves the customer (or you, on their behalf) decided and recorded, open by default, newest first; status=done or dismissed reads the closed…

• create_quest

  Add a quest to the file of a project: a next move the customer decided, kept where the work resumes ("get our MCP server listed on the AI tool directories"). title says the move; notes carry context and links. Adding is idempotent on the…

• update_quest

  Edit a quest: only the fields you send change (empty notes clear them). It is the customer's own file: a typo or a sharpened wording is simply corrected. The status changes through its own moves, complete_quest, dismiss_quest and…

• complete_quest

  Mark a quest done: the move happened. Sets the state and the closing date; calling it again leaves it done, so a retry is safe, and a dismissed quest that was done after all becomes done (the last move is what the file remembers). The…

• dismiss_quest

  Set a quest aside: the customer decided the move is off. Sets the state and the closing date; calling it again leaves it dismissed, so a retry is safe. The quest stays readable in the closed history of list_quests, and reopen_quest puts…

• reopen_quest

  Put a closed quest back in the file: it returns among the open moves with its sheet as it was, the date it was added, its author and its notes, so a quest closed by mistake or taken up again keeps its own history. Clears the closing date…

• get_results

  The score series of a tracker: one row per analyst, keyword, engine, tracker version and survey period, in chronological order. Depending on the analyst, a row carries citation_rate and weighted_score, share_of_voice, or sentiment counts.

• get_responses

  The raw answers of ONE AI engine for a tracker, newest surveys first, paginated. Every answer carries its cited sources and keyword mentions, plus uncited_sources (the pages the engine read without citing them) and searched (whether the…

• list_keyword_discoveries

  The keyword suggestions DISCOVERED on a tracker: domains the surveyed engines cite as sources again and again, that no tracked keyword covers. Recomputed on every read, from the recurrences the surveys have accumulated. Also carries…

• accept_keyword_discovery

  Accept one discovered suggestion (domain) or a batch (domains): each becomes a tracked keyword of the tracker, in place, and its series starts at the next survey. Refused with keyword_cap_reached when the batch would exceed the keyword…

• dismiss_keyword_discovery

  Dismiss one discovered suggestion (domain) or a batch (domains): the domains are never proposed again on this tracker, and appear in the dismissed list until restored. All-or-nothing on unknown domains: one that is not currently suggested…

• restore_keyword_discovery

  Restore one dismissed domain (domain) or a batch (domains): it leaves the tracker dismissed list and becomes eligible for discovery again, suggested anew while the engines keep citing it (accepting it stays a distinct move). The…

• list_competitor_scans

  The competitor scans of the account, newest first: a basket of up to 5 companies of one market, asked to one engine, from which the scan returns THE PLACES that corroborate them. `status` says where each one stands: draft (questions still…

• get_competitor_scan

  One scan and its list of PLACES: the domains the engine cited while answering about the basket, ranked by how many of its companies each place covers (`subjects`, the number that carries the tool) then by AI Authority. Each place carries…

• create_competitor_scan

  Prepare a competitor scan on a basket of up to 5 companies of the same market. Three or more is what the scan is built for: from there the places rank by RECURRENCE, that is by how many companies of the basket each one covers. It is…

• start_competitor_scan

  Arm a prepared scan: the engine is asked, and the prepaid balance is debited by the amount `estimated_cost_minor` announced on the scan. SPENDS: read that amount to the person and get their go-ahead before calling. The answers land within…

• update_competitor_scan

  Correct a scan still in draft, and set the cadence of one already armed. `questions` is where the measurement is won: send the questions to KEEP, with the wording you want asked. A question of the scan left out of the list is removed, and…

• list_sources

  The Atlas: the sources the AIs cite when they answer YOUR trackers. Each entry is a domain with its AI Authority on each AI, a 0 to 100 scale over the last 30 days where 100 is the source that AI cites the most. An engine with no value…

• get_source

  One entry of the Atlas, read by its id: the domain and its AI Authority on each AI. Call list_sources to find a source id, or to read the same entries filtered and ranked.

• list_source_channels

  The channels behind one source of the Atlas: who published the videos the AIs cited when answering the questions of this account, with their videos and the questions that surfaced each one. The unit of the Atlas is the registrable domain…

• get_account_settings

  The settings of the account: the legal name, billing country, postal address and intra-EU VAT number printed on its invoices, plus the language we write to it in and the time zone its hours are shown in. `member` names the person the…

Первые 60 из 67, в порядке сервера.