MCP-сервер esimgomobile

• Имя в реестреcom.esimgomobile/esimgomobileподтверждён в реестре MCP

Имя в реестре лежит в пространстве esimgomobile.com. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-21
• Инструменты36
• Сервер называет себяesimgomobile
• Версия сервера0.1.0
• Версия протокола2025-06-18

2026-10-21 сервер ответил на initialize и tools/list без входа. Первый ответ за 163 мс.

• Инструменты не делают ни одного из проверенных сценариев продукта: buy an eSIM for mobile data in 195 destinations; rent a permanent local phone number with voice and SMS; have an AI receptionist book appointments and take messages.
• Проверок пока 3 из 7, нужных, чтобы судить о надёжности.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

• Оценка INITE MCPчерез неделюдля оценки нужно 7 ежедневных проверок, пока 3
• Что агент может с ним сделать0 из 3 сценариев
• Отвечалидёт замерпроверок пока 3, долю покажем после 7
• Медиана первого ответа184 мс
• Место в контексте агента≈ 4 677 токеновописания всех инструментов (36), агент держит их в контексте на каждом ходу
• Описания инструментовA · 100 из 100
• Типизированные ответы36 из 36 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу

• Все инструменты проходят все шесть проверок.

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (30%), делает ли работу продукта (25%), описания (20%), контекст (10%) и использование (15%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

• run_speed_test

  Use when the user wants to measure their current internet speed. Runs a real download/ping measurement in the interactive widget and reports Mbps, ping, and a quality grade.

• get_public_ip

  Use when the user asks for their public IP address. Returns the IP address the request arrives from, as seen by the server edge.

• check_roaming_status

  Use when the user wants to know whether they are currently roaming. Compares their home country against the country they are in now.

• measure_latency

  Use when the user wants the network latency to a host. Performs a real HTTPS HEAD request from the deployment edge and reports round-trip time to first byte in milliseconds.

• grade_connection_quality

  Use when the user gives you download/upload speed and ping numbers and wants a verdict. Grades the connection Excellent/Good/Fair/Poor with practical advice.

• detect_captive_portal

  Use when the user is on hotel/airport/cafe Wi-Fi and suspects a login page is blocking them. Gives a step-by-step guided check — no automatic probing.

• check_dns_leaks

  Use when the user wants to check whether their DNS queries leak outside their VPN. Gives a guided manual check — browsers cannot run automatic DNS probes.

• get_wifi_security_checklist

  Use when the user is about to use public, hotel, or airport Wi-Fi. Returns a practical safety checklist.

• lookup_speed_requirements

  Use when the user asks how much bandwidth an activity needs (video calls, 4K streaming, gaming). Looks up reference requirements from a built-in table.

• check_coverage

  Use when the user asks whether a country is covered by esimgomobile plans. Answers from esimgomobile's own published plan catalog (live-checked) plus the built-in country network reference.

• estimate_data_usage

  Use when the user is planning a trip and asks how much mobile data they need. Estimates from trip days, daily hours online, and a light/moderate/heavy usage profile, then suggests a plan size.

• calculate_roaming_cost

  Use when the user wants to compare their home carrier's roaming fees against a travel eSIM. Compares a user-supplied carrier day-pass rate with an illustrative travel-eSIM daily rate.

• plan_multi_country_esim

  Use when the user has a multi-country itinerary and asks which eSIM plan type fits. Recommends single-country vs regional vs global plans from the country list.

• check_device_compatibility

  Use when the user asks whether their phone supports eSIM. Checks the model against a built-in device table, with a manual fallback check.

• check_carrier_lock

  Use when the user needs to check whether their phone is carrier-unlocked (required for travel eSIMs). Walks through the check on iPhone and Android.

• find_best_network

  Use when the user asks which mobile network is best in a specific city. Ranks operators by observed cell-tower density from the OpenCelliD open dataset — a coverage proxy, not a speed measurement.

• get_airport_connectivity

  Use when the user asks about connectivity at an airport (Wi-Fi, SIM vendors, eSIM tips). Answers from a researched dataset of major international airports: free Wi-Fi details, where to buy a SIM, and eSIM options on arrival.

• find_free_wifi

  Use when the user asks where to find free Wi-Fi in a city. Queries the live OpenStreetMap directory (Nominatim geocoding + Overpass) for community-mapped free Wi-Fi hotspots near the city.

• get_country_fact_sheet

  Use when the user asks about mobile networks, eSIM support, or Wi-Fi in a country. Returns a fact sheet from a built-in table, with general guidance where a country isn't listed.

• check_internet_freedom

  Use when the user asks about internet restrictions in a country (VoIP blocks, firewalls). Returns a high-level snapshot from a built-in table — not legal advice.

• get_installation_guide

  Use when the user needs step-by-step eSIM installation instructions. Covers iPhone and Android, via QR code or manual entry.

• troubleshoot_esim

  Use when the user's eSIM isn't working. Diagnoses common problems: no service, no data, slow data, QR issues, activation failures, calls not working.

• lookup_apn_settings

  Use when the user needs APN settings for a carrier after installing an eSIM. Looks up a built-in APN table; most travel eSIMs configure automatically.

• setup_dual_sim

  Use when the user runs a home line plus a travel eSIM and needs the right configuration. Explains which line handles data, calls, and iMessage, and how to avoid roaming charges.

• setup_data_saver

  Use when the user wants to stretch a travel data plan. Gives OS-specific steps: low-data mode, background limits, offline maps and downloads.

• format_international_number

  Use when the user needs to dial a local number internationally. Formats a local phone number for calling between two countries, using a built-in dialing-code table.

• calculate_data_budget

  Use when the user asks how much of their plan data is left or how to ration it over a trip. Computes remaining data, daily budget and end-of-trip projection from the plan size and usage so far (which the user's phone reports exactly).

• list_available_plans

  Use when the user asks what esimgomobile plans exist or what an eSIM costs. Lists the real, currently published plan catalog with USD prices (live-checked against esimgomobile.com).

• recommend_plan

  Use when the user says where they're going, for how long, and roughly how much they'll use data, and wants a concrete plan pick. Estimates the GB need, then picks the cheapest matching plan from the real published catalog with prices.

• get_travel_data_checklist

  Use when the user is preparing a trip and wants one pass over everything data-related for a country: networks, eSIM support, internet freedom, device check and install steps. Composes the built-in country, freedom, device and install…

• search_plans

  Use when the user wants to browse or filter esimgomobile plans - by type (data packs, monthly, day passes), max price, minimum GB, coverage scope, or cheapest per-GB. Reads the live published catalog (snapshot fallback, labeled).

• get_plan_details

  Use when the user asks about one specific esimgomobile plan by id - price, data allowance, validity, coverage scope, per-GB unit price, and where to buy.

• compare_plans

  Use when the user is choosing between 2-4 esimgomobile plans. Side-by-side price, data, validity, scope and per-GB unit price, with a best-value pick. No competitor API offers this.

• validate_order_draft

  Use when the user is about to buy and wants everything checked first - the eSIM Go validate-style dry run. Verifies the plan id exists, quantity (1-50), device eSIM compatibility, and single-country scope against the itinerary, then gives…

• plan_trip

  Use when the user gives an itinerary (countries + days + usage) and wants the full answer in one call: estimated data need, best published plan pick with an alternative, and a per-country networks/eSIM/freedom brief. Composite over the…

• list_country_networks

  Use when the user asks which mobile networks operate in a country, or for eSIM support / Wi-Fi / internet-freedom facts for one country - the eSIM Go /networks parity endpoint, from esimgomobile's built-in reference.