MCP-сервер InboxGuard

• Имя в реестреio.inboxguard/email-deliverabilityподтверждён в реестре MCP

Имя в реестре лежит в пространстве inboxguard.io. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-20
• Инструменты28
• Сервер называет себяinboxguard
• Версия сервера1.6.0
• Версия протокола2025-06-18

2026-10-20 сервер ответил на initialize и tools/list без входа. Первый ответ за 266 мс.

• Инструменты делают все проверенные сценарии: Scan a sending domain's SPF, DKIM and DMARC records; Publish the exact DNS fix at your registrar.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

• Оценка INITE MCP79 из 100отвечает 100 · делает работу 100 · описания 100 · контекст 94 · снижена из-за предупреждений ниже
• Что агент может с ним сделать2 из 2 сценариев
• Отвечал100% днейответов на ежедневные проверки: 7 из 7
• Медиана первого ответа273 мс
• Место в контексте агента≈ 3 804 токеновописания всех инструментов (28), агент держит их в контексте на каждом ходу
• Описания инструментовA · 100 из 100
• Типизированные ответы0 из 28 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу

• Все инструменты проходят все шесть проверок.

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (30%), делает ли работу продукта (25%), описания (20%), контекст (10%) и использование (15%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

• scan_domain

  Run a full email-deliverability scan (SPF, DKIM, DMARC, MTA-STS, TLS-RPT, MX TLS, BIMI, DNS blocklists) for a domain and return a 0-100 score with per-check findings. A check can come back `not_applicable` (does not apply to this domain…

• get_deliverability_score

  Return the overall deliverability score and letter grade for a domain (runs a fresh scan).

• check_blocklists

  Check a domain (apex + MX-host IPs) against supported DNS blocklists and return listings, targets checked, and issues (authoritative-side queries; no public-resolver false positives).

• get_dmarc_summary

  Summarize ingested DMARC aggregate (RUA) reports for a domain tracked in your InboxGuard account: report volume, pass rate, top sending sources, and the rua inbox to publish. The domain must already be added to the account, and the plan…

• list_domains

  List the account's tracked domains with latest scan score, last scan time, and open alert count.

• get_domain

  Full detail for one tracked domain: the domain record, the latest scan with all per-check findings (spf, dmarc, dkim, ptr, mta_sts, tls_rpt, mx_tls, blocklist), recent score history, open/recent alerts, and Google Postmaster stats when…

• list_alerts

  List the account's deliverability alerts (score drops, check failures, blocklist listings). Defaults to open alerts only.

• list_scans

  List recent scans (id, domain, run time, score) across all tracked domains, or for one domain when a name is given.

• resolve_alert

  Mark an alert resolved (or reopen it with resolved=false). Requires an API key with write/full scope. Resolving an already-resolved alert is a no-op.

• get_dns_fix_plan

  Compute the exact DNS-record changes needed to fix a tracked domain's deliverability, based on its latest scan and the org's connected registrar (Cloudflare/Route 53/GoDaddy/Namecheap). Read-only — nothing changes. Returns the `ops` to…

• apply_dns_fix

  Apply a DNS fix plan to a tracked domain by publishing records at the connected registrar. DESTRUCTIVE: it creates/updates/deletes DNS records. Two-step by design — first call get_dns_fix_plan, then pass its `connectionId` and `ops` here…

• analyze_headers

  Re-verify SPF, DKIM, DMARC, and ARC from a raw RFC 5322 email (full message or just the headers block). Returns InboxGuard's independent verdict (`ours`), the sender's own Authentication-Results (`theirs`), whether they `agree`, and…

• scan_domains_batch

  Queue an asynchronous batch scan of up to 50 domains and get a jobId immediately (avoids the 30s per-call limit). Poll get_scan_job with the jobId until status is succeeded/partial/failed to read per-domain scores. Requires an API key…

• get_scan_job

  Poll an async batch scan started with scan_domains_batch: returns status (queued/running/succeeded/partial/failed), completed count, and per-domain results (domain, ok, score, grade) as they finish.

• remove_domain

  Stop monitoring a domain and delete it (and its scan history) from the account. DESTRUCTIVE and not reversible. Requires an owner/admin API key with write or full scope. (To ADD a domain, run scan_domain with this API key — authenticated…

• list_registrar_connections

  List the registrar accounts (Cloudflare, Route 53, GoDaddy, Namecheap) connected to the org — provider, verification, last-used time — plus the supported providers. Use this to check whether the detect-and-fix loop (get_dns_fix_plan /…

• create_notification_channel

  Create a channel that InboxGuard alerts are delivered to: webhook (HMAC-signed), Slack, Microsoft Teams, PagerDuty, SMS, or email. Returns the channel id, and for kind=webhook the `signing_secret` used to verify deliveries. Requires an…

• create_share_link

  Create a read-only public share link for a tracked domain's latest report (anyone with the URL can view it; no account). Returns a `token` and the public `url` (https://inboxguard.io/r/<token>). Requires an owner/admin API key with write…

• connect_snds

  Store this org's Microsoft SNDS (Smart Network Data Services) automated-data-access key so InboxGuard syncs per-IP Outlook/Hotmail reputation daily. Get the key from the SNDS Automated Data Access page…

• get_snds_status

  Report whether Microsoft SNDS is connected for the org, the last sync time + status, how many sending IPs are tracked, and how many are currently blocked by Outlook/Hotmail. Use before get_snds_ip_stats to confirm the integration is live.

• get_snds_ip_stats

  Return the latest per-IP reputation from Microsoft SNDS for the org's sending IPs: filter result (GREEN/YELLOW/RED), complaint-rate band, spam-trap hits, message volume, and current block status. Requires SNDS to be connected (see…

• connect_inbox_placement

  Store the org's seed-list inbox-placement provider + API key (provider: 'mailreach' or 'glockapps'; GlockApps also needs projectId). Enables start_inbox_placement_test. Requires an owner/admin API key with write or full scope.

• get_inbox_placement_status

  Report whether a seed-list inbox-placement provider is connected for the org, which provider, and how many tests have run. Lists the supported providers when not connected.

• start_inbox_placement_test

  Start a seed-list inbox-placement test. Returns a testId, the seed addresses to mail your campaign to, and (if the provider requires it) a header to insert. After sending to the seeds, poll get_inbox_placement_test for the…

• get_inbox_placement_test

  Poll a seed-list inbox-placement test by testId. Returns status (running/completed/failed) and, once measured, the Inbox/Spam/Missing counts and inbox-placement score (0–100). Call after sending your campaign to the seed addresses from…

• list_inbox_placement_tests

  List recent seed-list inbox-placement tests for the org (most recent first) with their status and Inbox/Spam/Missing scores.

• get_deliverability_report

  Return a structured deliverability report for a tracked domain: the latest score + letter grade + `scoreSubtitle` (explains the denominator when a check was excluded, e.g. "80/100 · scored on 65 of 83 applicable points · 1 check…

• get_portfolio

  Org-wide deliverability rollup across every monitored domain: average score + overall grade, the grade distribution (how many domains are A/B/C/D/F/unscored), total open alerts, the domains needing attention (lowest score / open alerts…