MCP-сервер livedot

• Имя в реестреme.livedot/mcpподтверждён в реестре MCP

Имя в реестре лежит в пространстве livedot.me. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-27
• Инструменты20
• Сервер называет себяlivedot
• Версия сервера1.0.0
• Версия протокола2025-06-18

2026-10-27 сервер ответил на initialize и tools/list без входа. Первый ответ за 131 мс.

• Инструменты делают track a rider's or runner's position and finish time during a race; send a tap of encouragement to someone racing, но не record kilometres toward a December 200 km or 1000 km challenge.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

• Оценка INITE MCP63 из 100отвечает 100 · делает работу 67 · описания 100 · контекст 67 · использование 0 · подключение 100 · снижена из-за предупреждений ниже
• Что агент может с ним сделать2 из 3 сценариев
• Отвечал100% днейответов на ежедневные проверки: 8 из 8
• Медиана первого ответа221 мс
• Место в контексте агента≈ 10 291 токеновописания всех инструментов (20), они занимают контекст агента на каждом ходу
• Описания инструментовA · 100 из 100
• Типизированные ответы20 из 20 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу

• Все инструменты проходят все шесть проверок.

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (25%), делает ли работу продукта (25%), описания (20%), контекст (10%), использование (10%) и насколько просто подключиться (10%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

• find_person

  Finds a person who is live on livedot right now (cycling on Windline, running on RunFast) and answers where they are. Use it when the user asks where someone is or how they're doing in a race ("Where's Megan in the Comrades?"), or gives a…

• where_is

  Where someone is right now, in a live race or on a ride or run of their own (Ride live, Run live), and the weather they're in: km and mile on the course, time against their goal, pace, the finish time it points to, the temperature and…

• event_status

  Shows how a live race on livedot is going. Use it when the user asks how a race is going or who is leading ("How's the Comrades going?", "Who's leading the Coast Classic?"). Inputs: event (the race's name). Returns: whether it's live, how…

• club_in_race

  Shows how a club, team or coach's athletes are doing in a live race. Use it when the user asks about a club or team in a race ("How is the UCT team doing in the Comrades?") or a coach's athletes ("How are Coach Nadia's runners doing in…

• event_weather

  What the weather will be like for a cycling or running event, for the people taking part: "What will the weather be like for the NYC Marathon?", "Weather for the Comrades demo?". Within 10 days of the start: the live forecast (Apple…

• fly_route

  Fly over a race course inline: "Fly the Comrades", "Show me the course", "What does the NYC Marathon route look like?". Returns a flyover of the course on a map that plays in the chat, coloured by the weather along it (the live forecast…

• tour_route

  A Windline cycling tour's route, day by day: "What's the Durban Tour 2027 route?", "Give me the GPX files for Alistair's tour", "Where is Alistair's Durban tour?". On the tour's days its card offers a tap on the back for the organiser…

• tour_notes

  Beta, cycling tours only: the organiser's own notes for riders on a Windline tour (what to pack, how the tour runs, meeting points), for questions like "What should I pack for the Durban tour?". Answer only from the notes: quote and…

• tap_on_the_back

  Sends a tap on the back: a short buzz on the person's phone, with the sender's name if signed in (or a first name they give). In the day after a finish it arrives as a congratulation. Use it only when the user explicitly asks to give…

• find_clubs

  Find running and cycling clubs near a place, e.g. best running club to join in Fourways, beginner cycling group near Sandton. Lists approved clubs and organisers on Windline (cycling) and RunFast (running) nearest first, with their weekly…

• find_events

  Find public cycling and running events near a place and when: races, multi-day tours, club rides and club runs on Windline and RunFast, e.g. trail runs near Cape Town in November, cycle tours around Johannesburg. Each with its date, where…

• find_coaches

  Find cycling and running coaches and training groups near a place, e.g. personal cycling trainer in Johannesburg, running coach near Sandton, coaches near Fourways. Use it for any coach, personal trainer, coaching or training group…

• plan_route

  Weather and a flyover for a GPX file or route the user shares. If the user attached a GPX or route file, call plan_route and pass the file as gpx_file; if you can read the file's contents yourself, you may instead pass its text as gpx or…

• list_my_events

  The signed-in organiser's own events on Windline (rides, tours, races) or RunFast (runs, races, and their clubs' runs): each with its id, status (draft or published), who it's for (private or shared), dates, distance, whether it's…

• create_event

  Create an event in the signed-in account from GPX files or links: a cycling ride, tour or race (Windline) or a run or running race (RunFast). Pass every GPX the user gave as files: several files make a multi-day tour by themselves (never…

• update_event

  Change one of the signed-in organiser's events: its name, description or notes, or start dates and times. Never a finished event (finished events stay as they were). Tell the user exactly what will change and get a yes first.

• add_tour_notes

  Set or add to a Windline cycling tour's notes for riders (what to pack, how the tour runs, meeting points; markdown, up to 10,000 characters), shown on the tour's page. Never a finished tour. Show the user the notes and get a yes first.

• publish_event

  Publish one of the signed-in organiser's draft events, so anyone with its link can see it (Windline: at tour., event. or ride.windline.tech/<address>). Private events can't be published. ALWAYS ask the user to confirm first, then call…

• post_club_ride

  Post a DRAFT group ride (Windline) or club run (RunFast) on a club or organiser page the signed-in person runs, from a GPX route or link, once or weekly: always for the group, never private. Publish it with publish_event. Confirm the…

• invite_members

  Invite a club's members, or a tour's riders, by email, from a list the organiser gives (a CSV, a spreadsheet's text, or names and addresses typed in): for a club or organiser page the signed-in person runs (page on Windline, club on…