MCP-сервер Proof Holdings

• Имя в реестреholdings.proof/mcp-serverподтверждён в реестре MCP

Имя в реестре лежит в пространстве proof.holdings. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-27
• Инструменты167
• Сервер называет себяproof-holdings
• Версия сервера1.7.1
• Версия протокола2025-06-18

2026-10-27 сервер ответил на initialize и tools/list без входа. Первый ответ за 639 мс.

• Делают ли инструменты работу продукта, ещё не проверено.
• Проверок пока 2 из 7, нужных, чтобы судить о надёжности.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

• Оценка INITE MCPчерез неделюдля оценки нужно 7 ежедневных проверок, пока 2
• Использование16 загрузок npm в неделю
• Отвечалидёт замерпроверок пока 2, долю покажем после 7
• Медиана первого ответа771 мс
• Место в контексте агента≈ 42 441 токеновописания всех инструментов (167), они занимают контекст агента на каждом ходу
• Описания инструментовA · 100 из 100
• Типизированные ответы0 из 167 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу

• Параметры без описания: в 1 из 167

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (25%), делает ли работу продукта (25%), описания (20%), контекст (10%), использование (10%) и насколько просто подключиться (10%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

• create_verification

  Create a new identity verification. Initiates a verification flow for an asset identifier (phone number, email, domain, social handle, wallet address, account, or Telegram bot). Agent usage: pass the asset `type`, the delivery `channel`…

• get_verification

  Get a verification by ID. Returns the full verification object including status, channel, and proof token if verified. Before calling this for a challenge you created, make sure your reply text already shows the user what to act on — the…

• list_verifications

  List verifications with optional filters. Returns paginated results. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• trigger_verification

  Trigger a DNS/HTTP verification check for a pending domain verification. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• submit_verification_code

  Submit an OTP/challenge code for a pending verification. Accepted ONLY where we delivered the code out-of-band to the party being verified: type "email", and type "domain" with channel "email". Any other pair answers 400…

• resend_verification

  Resend a verification message (email channel only). Generates and sends a new code. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• test_verify

  Auto-complete a verification in test mode (pk_test_* API keys only). Useful for testing flows without real OTP delivery. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool…

• list_verified_users

  List verified users grouped by external_user_id. Shows all verifications per user. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• get_verified_user

  Get a single verified user and their verifications by external user ID. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• start_domain_verification

  Start a B2B domain verification. Creates a verification record and returns DNS/HTTP instructions for the customer to complete. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool…

• check_domain_verification

  Check the status of a pending domain verification. Triggers a DNS/HTTP check and returns the updated status. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again…

• delete_domain_verification

  Delete a domain verification attempt that is not verified (pending, verifying or failed) — nothing is revoked. A verified domain, or one that needs re-verification, is refused with domain_verified: removing it revokes its proofs and every…

• wait_for_verification

  Poll a verification until it reaches a terminal state (verified, failed, expired, revoked, or cancelled). Uses exponential backoff (2s initial, 1.5x, 30s max) with jitter. A multi-channel verification that lost the race is "cancelled" and…

• create_multi_channel_verification

  Create a multi-channel phone verification: one phone number challenged over several channels at once (OR / first-wins). The first channel the user completes wins, yields a single proof token, and cancels the losing siblings. Exactly one…

• get_multi_channel_verification_status

  Get the status of a multi-channel verification group by its group_id. Returns the aggregate status (pending/verified/expired), the winning_channel once one completes, per-channel statuses, and the proof token (with expires_at) when the…

• create_verification_request

  Create a multi-asset verification request. Allows verifying multiple assets (phone, email, domain, social, wallet, account, telegram_bot) in a single flow. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp →…

• get_verification_request

  Get a verification request by ID. Returns the request with all its asset verification statuses. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT…

• get_request_proofs

  Get proof tokens for verified assets in a verification request. Returns proof tokens that can be used for offline verification. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this…

• list_verification_requests

  List verification requests with optional filters. Returns paginated results. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• get_request_by_reference

  Get a verification request by its reference ID (your unique identifier). ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• cancel_verification_request

  Cancel a pending verification request. Only pending requests can be cancelled. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT open this tool.

• wait_for_request

  Poll a verification request until it reaches a terminal state (completed, expired, or cancelled). Uses exponential backoff (2s initial, 1.5x, 30s max) with jitter. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp…

• validate_proof

  Validate a proof token online. Checks the token signature, expiry, and revocation status against the server, and optionally that the proof is about the identifier you expect. Public endpoint — no API key required.

• get_proof_status

  Get the status of a proof by its public handle (ph_ctl_* / ph_dlg_*) or a verification ID. Returns whether the proof is active, suspended, expired, or revoked — a live proof reads "active". ACCESS: needs a Proof account. Authenticate this…

• revoke_proof

  Revoke a proof by its public handle (ph_ctl_* / ph_dlg_*) or a verification ID — the same addresses get_proof_status takes. The proof token will no longer validate anywhere: the status endpoint, the public validator, the revocation list…

• list_revoked_proofs

  Get the revocation list for offline proof validation. Returns a signed list of all revoked proof IDs. Reuse a fetched list for up to 5 minutes (its cache lifetime), then fetch it again to see new revocations; if you cannot, its signature…

• create_session

  Create a new phone verification session. Returns deep_link, qr_code (base64 PNG), and qr_text (UTF-8 text QR for terminal display). Sessions provide a hosted verification flow with callbacks. Agent usage: After creating a session, pass…

• get_session

  Get a session by ID. Returns the session status, verification details, and proof token if verified. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does…

• wait_for_session

  Poll a session until it reaches a terminal state (verified, failed, or expired). Uses exponential backoff (2s initial, 1.5x, 30s max) with jitter. Before calling this for a challenge you created, make sure your reply text already shows…

• list_assets

  List all verified assets for the authenticated user. Assets are verified identities (phones, emails, domains). ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again…

• get_asset

  Get a single verified asset by ID. Returns details including type, value, status, and verification timestamps. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again…

• revoke_asset

  Revoke the proofs of one of your assets (a phone, email or domain) — the asset stays on the account. Owner only: sign in with start_login (a connection with only an API key is refused user_session_required — a key revokes a proof with…

• get_current_user

  Get the signed-in user's account details, plan and settings. Needs a login session: call start_login, then wait_for_login until it reports success. An API key alone cannot read this — for the key's own account use get_self_api_key or…

• list_auth_sessions

  List the current user's signed-in devices: every session that can still renew, idle ones included. Each shows its channel, user agent and expires_at, which is when the session stops being able to renew (not when its current access token…

• revoke_auth_session

  Sign out one device (session) by ID. Over a signed-in session it cannot end the current one (that is logout). Over an API key it can end any of the account's sessions. ACCESS: needs a Proof account. Authenticate this client (Claude Code…

• get_usage

  Get usage metrics for the authenticated account. Shows verification counts, API calls, and quota usage. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login…

• get_platform_summary

  Get a one-call account snapshot: quota with end-of-month projection, request health (pending/completed/expired counts + success rate), per-channel completion rates, HITL counts, and active API key count. The same data the dashboard home…

• get_settings

  Get account settings: the outbound webhook endpoint with its event subscriptions, and the default proof lifetime. Branding (name, logo, colour, email theme, support email) belongs to each sub-account (project): read it with get_profile…

• update_settings

  Update account settings: the outbound webhook endpoint with its event subscriptions, and the default proof lifetime. Branding belongs to each sub-account (project): change it with update_profile. Setting the first webhook endpoint creates…

• export_data

  Export a complete copy of your account's data (GDPR Articles 15 and 20), or check on one. Owner only: sign in with start_login first (a connection with only an API key is refused user_session_required). The first call starts the export…

• search

  Prefix-anchored global account search across six resource buckets (verification_requests, verifications, hitl, confirmations, authorizations, api_keys). Case-sensitive prefix match over indexed plaintext fields only; recipient identifiers…

• get_self_api_key

  Get the calling API key's own redacted metadata (id, name, key_prefix, environment, scopes, last_used_at, revoked_at, created_at) for agent self-inspection. Never returns the key hash or full secret. Requires API-key auth — a JWT session…

• get_api_key_usage

  Get per-API-key usage for a given key id: verification counts by type/channel/status, plus verification-request/confirmation/authorization totals, and attribution context (attribution_cutoff_at, attributed_fraction). The counts cover the…

• list_templates

  List the custom message templates of one sub-account (project), organized by channel and message type. Templates belong to a project, not to the account: profile_id picks it — omitted, a project-bound key lists its own project and an…

• get_default_templates

  Get all default message templates. These are the built-in templates a project sends when it has no custom template of its own. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool…

• get_template

  Get the template a sub-account (project) sends for a channel and message type: its custom template if set (scope "project"), otherwise the default (scope "default"). The response names the project in profile_id. ACCESS: needs a Proof…

• update_template

  Create or update a sub-account's (project's) custom template for a channel and message type, replacing the default for that project only. Name the brand with {{business_name}}: a template spelling out a project's own name is refused…

• delete_template

  Delete a sub-account's (project's) custom template, reverting that project to the default template for the channel and message type. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call…

• preview_template

  Preview a template with sample data before saving, as a sub-account (project) would send it. Shows how the message will look with placeholder variables filled in. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp…

• render_template

  Render the template a sub-account (project) sends — its custom template, otherwise the default — with provided variables. Returns the fully rendered message content. ACCESS: needs a Proof account. Authenticate this client (Claude Code…

• get_webhook_stats

  Get webhook delivery statistics including total deliveries, success/failure counts, and recent activity. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login…

• list_webhook_deliveries

  List webhook delivery attempts with pagination and filtering. Shows delivery status, response codes, and timestamps. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again…

• get_webhook_delivery

  Get details of a single webhook delivery attempt including request/response payloads and retry history. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login…

• retry_webhook_delivery

  Retry a failed webhook delivery. Creates a new delivery attempt with the same payload to the configured endpoint. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again…

• get_subscription

  Get the current subscription details including plan, status, billing period, and usage limits. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does NOT…

• list_profiles

  List all profiles for the authenticated account. Returns all profiles including primary and secondary. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool again. start_login does…

• create_profile

  Create a new profile with optional display name, bio, avatar, business info, email branding (theme, support email), and theme settings. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call…

• get_profile

  Get a specific profile by ID. Returns full profile details including theme, custom links, and verification display settings. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp → Authenticate), then call this tool…

• update_profile

  Update a profile by ID. Supports changing display info, email branding (theme, support email), theme, custom links, and verification display settings. ACCESS: needs a Proof account. Authenticate this client (Claude Code: /mcp →…

• delete_profile

  Delete a project (profile). Revokes its API keys, archives the HITL setups and declines the pending requests created with its own keys, keeps its history but unlinks it, deletes its message templates, and retires its username for good…

Первые 60 из 167, в порядке сервера.