Перейти к содержимому
Логотип RoboSelect360

MCP-сервер RoboSelect360

Какие MCP-серверы принадлежат RoboSelect360, из официального реестра и найденные запросом к его домену, отвечают ли они и что умеют. Всё это проверила программа, а не переписал человек со страницы продукта.

прочитано 2026-10-20

← Назад к RoboSelect360

Чей это сервер
  • Имя в реестреcom.roboselect360/humanoid-robotsподтверждён в реестре MCP

Имя в реестре лежит в пространстве roboselect360.com. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

Что он ответилпроверено 2026-10-20
  • Состояниеотвечаетпроверено 2026-10-20
  • Инструменты29
  • Сервер называет себяRoboSelect360
  • Версия сервера1.30.0
  • Версия протокола2025-06-18

2026-10-20 сервер ответил на initialize и tools/list без входа. Первый ответ за 499 мс.

Стоит ли агенту его подключатьПока не ясно
  • Делают ли инструменты работу продукта, ещё не проверено.

После подключения

  • У 26 из 30 инструментов параметры без типа или описания: проверяйте аргументы перед вызовом.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

Замер каждый деньежедневных проверок: 16, первая 2026-10-20
  • Оценка INITE MCP94 из 100отвечает 100 · описания 86 · контекст 92 · подключение 100
  • Отвечал100% днейответов на ежедневные проверки: 16 из 16
  • Медиана первого ответа523 мс
  • Место в контексте агента≈ 3 998 токеновописания всех инструментов (30), они занимают контекст агента на каждом ходу
  • Описания инструментовB · 86 из 100
  • Типизированные ответы0 из 30 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу
  • Параметры без описания: в 26 из 30

Что агент может с ним сделать

  • не ясно · compare humanoid robots by components and their suppliers
  • не ясно · estimate total cost of ownership for a robot project
  • не может · check EU machinery regulation requirements before deploying a robot

Каждый сценарий продукта мы задали Jev вместе со списком инструментов сервера: может ли агент сделать это этими инструментами?

На что посмотреть

В этих описаниях нет ни одного из пяти тревожных признаков.

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (25%), делает ли работу продукта (25%), описания (20%), контекст (10%), использование (10%) и насколько просто подключиться (10%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

Инструменты сервераинструментов: 29 · прочитано 2026-10-20
  • hardware_get_system_status

    Health of the SEMICONDUCTOR layer: profiles loaded, semiconductor signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • hardware_list_robots

    List the robot catalogue with filters, including semiconductor-layer scope and payload. Returns the same catalogue as the mechanical and software variants - call one, not three. Pick this one to filter on whether a robot is in scope for…

  • hardware_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus whether a per-robot semiconductor bill of materials exists for it. The commercial fields are identical in all three get_robot variants - the layer flag is the only…

  • hardware_list_signals

    List semiconductor supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • hardware_get_robot_signals

    Active supply chain signals affecting one robot's semiconductor BOM. Requires an access right on the robot requested.

  • hardware_get_block_analysis

    Analyse one functional block of the semiconductor layer, for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • hardware_compare_robots

    Compare 2 to 5 robots side by side on semiconductor BOM, metrics, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • hardware_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its semiconductor BOM: geographic concentration, single-source exposure, export control. Requires an access right on the robot requested.

  • hardware_get_robot_hardware

    Semiconductor bill of materials for one robot: functional blocks, components, suppliers. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • mechanical_get_system_status

    Health of the MECHANICAL layer: mechanical profiles loaded, mechanical signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • mechanical_list_robots

    List the robot catalogue with filters, including mechanical-profile status and payload. Returns the same catalogue as the hardware and software variants - call one, not three. Pick this one to filter on mechanical coverage.

  • mechanical_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its mechanical-profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • mechanical_list_signals

    List mechanical supply chain, performance and operational signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • mechanical_get_robot_signals

    Active supply chain signals affecting one robot's mechanical BOM. Requires an access right on the robot requested.

  • mechanical_get_block_analysis

    Analyse one mechanical block (actuation, structure, energy, perception), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • mechanical_compare_robots

    Compare 2 to 5 robots side by side on mechanical BOM, specifications, risk and geographic exposure. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • mechanical_get_dependency_profile

    Geopolitical and supply chain dependency analysis for one robot, built on its mechanical BOM: geographic concentration, critical raw materials, single-source exposure. Requires an access right on the robot requested.

  • mechanical_get_robot_mechanical

    Mechanical bill of materials for one robot: motors, reducers, screws, bearings, batteries, structure, wiring. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • software_get_system_status

    Health of the SOFTWARE layer: software profiles loaded, software signal counts, load errors. One status tool per layer - the three report different layers, not the same server.

  • software_list_robots

    List the robot catalogue with filters, including software tier and software-profile status. Returns the same catalogue as the hardware and mechanical variants - call one, not three. Pick this one to filter by software tier.

  • software_get_robot

    Commercial profile of one robot (specs, pricing, viability score), plus its software tier and profile status. The commercial fields are identical in all three get_robot variants - the layer flag is the only difference.

  • software_list_signals

    List software supply chain signals across the panel, with filters. Panel-wide, not per robot: requires an access right on at least one robot.

  • software_get_robot_signals

    Active supply chain signals affecting one robot's software stack. Requires an access right on the robot requested.

  • software_get_block_analysis

    Analyse one software block (OS, middleware, runtime, control, fleet), for a single robot at a time. Requires an access right on the robot named, or on at least one robot when none is.

  • software_compare_robots

    Compare 2 to 5 robots side by side on software BOM, TCO, jurisdiction exposure, lock-in and export control risk. Requires an access right on EVERY robot listed; if one is missing the call returns a refusal naming it, and compares nothing.

  • software_get_dependency_profile

    Jurisdiction and supply chain dependency analysis for one robot, built on its software stack: jurisdiction concentration, lock-in, export control, cloud dependency. Requires an access right on the robot requested.

  • software_get_robot_software

    Software bill of materials for one robot: OS, middleware, AI runtime, motion control, fleet management. Requires an access right on the robot requested; without it the call returns a refusal naming that robot.

  • get_access_manifest

    What THIS connection can call right now: tools callable without any purchase, tools that need an access right, the robots you already hold, and the ones that can be unlocked. Free for everyone, no key and no account. Call it FIRST: it…

  • get_robot_capabilities

    What one robot has actually been seen doing, and the evidence for each capability: a label per capability (in production, attested by a customer or third party, shown by the manufacturer, claimed only, published failure, no evidence…

Как подключить

Добавьте сервер в конфиг MCP-клиента. Claude Desktop, Cursor и большинство других клиентов понимают такой вид:

{
  "mcpServers": {
    "humanoid-robots": {
      "type": "http",
      "url": "https://mcp.roboselect360.com/mcp"
    }
  }
}

Подключить

Claude Code, в терминале

claude mcp add --transport http roboselect360 https://mcp.roboselect360.com/mcp

Добавить в CursorДобавить в VS Code

claude.ai, ChatGPT и другие клиенты: добавьте https://mcp.roboselect360.com/mcp как свой коннектор в настройках.

Каждую строку нашла программа: запись в реестре, ответ самого сервера, разобранная спецификация. Если строки нет, мы этого не нашли; это не значит, что этого нет.