MCP-сервер Setip

• Имя в реестреio.setip/emailmcpподтверждён в реестре MCP

Имя в реестре лежит в пространстве setip.io. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-26
• Инструменты56
• Сервер называет себяemailmcp
• Версия сервера1.0.0
• Версия протокола2025-06-18

2026-10-26 сервер ответил на initialize и tools/list без входа. Первый ответ за 429 мс.

• Инструменты не делают ни одного из проверенных сценариев продукта: Provision free phone numbers with eSIM and SMS relay; Search legal investigation sources across 77 databases.
• Проверок пока 2 из 7, нужных, чтобы судить о надёжности.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

• Оценка INITE MCPчерез неделюдля оценки нужно 7 ежедневных проверок, пока 2
• Что агент может с ним сделать0 из 2 сценариев
• Отвечалидёт замерпроверок пока 2, долю покажем после 7
• Медиана первого ответа421 мс
• Место в контексте агента≈ 6 833 токеновописания всех инструментов (56), они занимают контекст агента на каждом ходу
• Описания инструментовB · 82 из 100
• Типизированные ответы0 из 56 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу

• Параметры без описания: в 3 из 56
• Не сказано, только читает инструмент или может удалять: 56 из 56

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (25%), делает ли работу продукта (25%), описания (20%), контекст (10%), использование (10%) и насколько просто подключиться (10%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

• send_email

  Send an email with text or HTML content

• send_template_email

  Send an email using a predefined template

• validate_email

  Validate email addresses and check deliverability

• get_email_usage

  Get email usage statistics — delivery rate, bounce rate, per-domain breakdown, top bounce reasons. Reads from persistent stats.

• verify_email_setup

  Verify IP whitelisting and email provider configuration

• list_email_accounts

  List all configured IMAP email accounts. Shows default and named accounts (work, personal, etc.).

• read_inbox

  Read emails from an inbox via IMAP with filtering options. If IMAP is configured in .env, no credentials needed. Use "account" to pick a named account (work, personal, etc.).

• get_mailbox_status

  Get status information for an email mailbox. If IMAP is configured in .env, no credentials needed. Use "account" to pick a named account.

• list_mailboxes

  List all available mailboxes for an email account. If IMAP is configured in .env, no credentials needed. Use "account" to pick a named account.

• start_smtp_receiver

  Start the SMTP server to receive forwarded corporate emails

• stop_smtp_receiver

  Stop the SMTP forward receiver server

• get_smtp_receiver_status

  Get the current status of the SMTP forward receiver

• get_forwarded_emails

  Retrieve forwarded emails with optional filtering

• get_conversation_threads

  Get conversation threads with forwarded emails

• get_conversation_context

  Get full conversation context for a specific thread

• get_threads_for_sender

  Get all conversation threads involving a specific sender

• check_email_config

  Check if email providers are configured, guide setup if needed

• configure_mailgun

  Configure Mailgun email provider with step-by-step guidance

• test_email_config

  Test email configuration by sending a test email

• create_mailbox

  Create a new local mailbox for receiving email (autonomous mode). Each address gets its own inbox accessible via MCP tools.

• delete_mailbox

  Delete a local mailbox and all its stored emails (autonomous mode)

• list_local_mailboxes

  List all local mailboxes on this server (autonomous mode)

• request_email_ip

  Request a dedicated WireGuard IP for email sending. Submits to the provisioning queue.

• check_ip_status

  Check the status of a pending WireGuard IP provisioning request

• get_dns_records

  Generate all required DNS records (A, MX, SPF, DKIM, DMARC) for autonomous email. Outputs copyable records for your DNS provider.

• verify_autonomous_setup

  Verify that autonomous email is properly configured: DNS records, DKIM, SMTP send/receive

• setup_autonomous_security

  Auto-configure DKIM, SPF, and DMARC for autonomous email. Generates DKIM keys, creates DNS records, and outputs everything needed.

• create_email_rule

  Create a rule that triggers actions when incoming emails match conditions. Actions: forward, auto_reply, webhook, flag, move, mcp_tool, log, reject.

• list_email_rules

  List all email rules with their match conditions, actions, and hit counts

• delete_email_rule

  Delete an email rule by ID

• update_email_rule

  Update an existing email rule (enable/disable, change match/actions/priority)

• start_idle_watch

  Start real-time IMAP IDLE watching on email accounts. Get push notifications when new emails arrive. Works with Gmail, iCloud, Office365, etc.

• stop_idle_watch

  Stop IMAP IDLE watching on an account (or all accounts)

• get_idle_status

  Get status of IMAP IDLE watchers — which accounts are being watched, connection status, new email counts

• provision_start

  Phase 1: Create a cloud VPS with dedicated IP. Generates WireGuard config. Returns the IP and instructions to connect. Supports DigitalOcean, Vultr, Hetzner, OVH.

• provision_resume

  Resume provisioning from where you left off. Automatically detects the current phase and advances: WireGuard connection → DNS setup → TLS → verification. Run this after each user action (connecting WireGuard, adding DNS records).

• provision_status

  Show current provisioning state — which phases are complete, what to do next

• list_cloud_providers

  List supported cloud providers with pricing, regions, and PTR support info

• start_health_monitor

  Start monitoring the provisioned email server — checks tunnel, SMTP, DNS, and IP reputation every 60 seconds. Auto-restarts on failure.

• get_health_status

  Get current health status of the email server — tunnel, SMTP, DNS, IP blocklist checks

• add_sending_domain

  Add a customer sending domain. Generates DKIM keys and returns the 4 DNS records the customer needs to add. Works like SendGrid domain authentication — self-hosted.

• list_sending_domains

  List all configured sending domains with their verification status

• remove_sending_domain

  Remove a sending domain and its DKIM keys

• get_domain_dns_records

  Get the DNS records a customer needs to add for a sending domain

• regenerate_zone_file

  Regenerate the complete DNS zone file for the service domain including all customer subdomains. Use after adding/removing domains.

• create_email_account

  Create an email account with SMTP credentials. Returns SMTP password once — save it. The account can then send/receive via this server.

• delete_email_account

  Delete an email account and revoke its SMTP credentials

• list_email_accounts_managed

  List all email accounts with SMTP credentials (optionally filtered by domain)

• reset_account_password

  Reset the SMTP password for an email account. Returns new password once.

• start_domain_verification

  Begin a domain-verification window: temporarily set the target domain's MX to verify.setip.io, start (or reuse) the EmailMCP SMTP receiver on :25, and forward any inbound mail for *@domain to forward_to so a human can grab a verification…

• stop_domain_verification

  Tear down an active domain-verification window: restore MX (snapshot or supplied real_mx_target), remove the per-domain forwarder. Stops the receiver if no other windows remain.

• get_domain_verification_status

  Show active verification windows, the receiver state, and TTLs.

• get_domain_verification_emails

  List mails received in the verification window for a given domain (e.g. to find Apple's verification code without checking the forward_to mailbox).

• set_personal_email_credentials

  Attach a personal account's own SMTP + IMAP credentials (iCloud, Gmail app password, Fastmail, Office365, etc.) to an existing account. Once set, send_email with from=<address> sends via that SMTP and IMAP-APPENDs a copy to its Sent…

• get_suppression_list

  View all addresses on the bounce suppression list — these addresses will be rejected on send

• remove_from_suppression

  Remove an address from the bounce suppression list (manual override to allow sending again)