Servidor MCP de Ampworth

• Nome no registrocom.ampworth/ampworthverificado no registro MCP

O nome no registro fica sob ampworth.com. O registro só libera esse espaço de nomes para quem prova controle do domínio por DNS ou HTTP.

• Estadorespondeverificado em 2026-10-21
• Ferramentas15
• O servidor se chamaampworth
• Versão do servidor1.0.0
• Versão do protocolo2025-06-18

Em 2026-10-21 o servidor respondeu a initialize e tools/list sem login. Primeira resposta em 227 ms.

• As ferramentas fazem todos os casos de uso verificados: size a solar system for a roof; estimate heat pump size from gas bills.
• Verificado em 1 dos 7 dias necessários para julgar a confiabilidade.

Dito por regras a partir das medições acima. A primeira chamada provável é a escolha de um modelo na lista de ferramentas; leia a descrição antes de confiar nela.

• Nota INITE MCPdepois de uma semanaa nota precisa de 7 verificações diárias: 1 até agora
• O que um agente consegue fazer com ele2 de 2 casos de uso
• Respondeumedindo1 das 7 verificações diárias necessárias para mostrar a porcentagem
• Mediana da primeira resposta1452 ms
• Espaço no contexto do agente≈ 10.329 tokensas definições de todas as ferramentas (15), que o agente carrega a cada turno
• Definições das ferramentasA · 100 de 100
• Resultados tipados15 de 15 ferramentasdeclaram outputSchema: o resultado chega tipado e é lido de uma vez

• Todas as ferramentas passam nas seis verificações.

Um programa verifica o servidor uma vez por dia: initialize e tools/list, sem modelo. Os tokens são o tamanho das definições, a cerca de quatro caracteres por token. A nota é a média de seis verificações do nome, da descrição, do esquema e das anotações de cada ferramenta; diz se as ferramentas estão bem descritas, não se funcionam. A nota pesa só o que foi medido: se responde (30%), se faz o trabalho do produto (25%), definições (20%), contexto (10%) e uso (15%). Uma parte não medida fica de fora, e uma instrução oculta limita a nota a 40. O estado dos servidores MCP dos fornecedores: método e números →

• connection_route

  Work out which ENA connection procedure a domestic installation of solar panels, batteries or both falls under: connect first and notify the distribution network operator within 28 days, or apply and wait for approval before anything is…

• get_document

  Fetch the full text of one guide, article or set of questions by its slug, as Markdown, not HTML. Slugs come from search_documents or list_documents. The answer carries the MCS documents the text draws on, and the ids of any calculators…

• heat_pump_noise

  Calculate the sound pressure level an air source heat pump produces at an assessment position, and whether it meets the 37 dB(A) permitted development noise limit, using the method in MCS 020. The formula is Lp = Lw + 10 log(Q / 4.pi.r^2)…

• heat_pump_running_cost

  Compare what a household spends heating on its current fuel with what the same heat would cost from a heat pump. The heat demand is worked out from the household's own metered fuel use, not from a model, because a year of bills describes…

• heat_pump_size

  Estimate the heat pump a UK house needs, and what it would cost to run against the fuel it burns now. IMPORTANT: MIS 3005-D requires a heat pump to be sized from a room-by-room heat loss calculation to BS EN 12831, and nothing here…

• hot_water_cylinder

  Work out the daily hot water demand of a dwelling and the size of cylinder a heat pump needs, using the formula in MIS 3005-D 3.5.2 and the BS 6700 guidance reproduced in MGD 007. The demand is 45 litres a day for each of N, where N is…

• list_calculators

  Lists every calculator on this server, with the standard behind it and whether it is the whole-system sizing calculator or one of the single-method ones, plus the reference data a caller needs to build a valid request: the compass…

• list_documents

  Lists every document, optionally filtered by kind ('guide', 'article' or 'faq'), by category, or, for guides, by the reader they are written for. Guides are shelved by perspective: 'considering', 'buying', 'selling', 'installing' and…

• radiator_flow_temperature

  Work out the flow temperature a heat pump must produce to heat a room through a given radiator, and the resulting MCS Heat Emitter Guide star rating, following section 4 of MGD 007. This is the calculation that decides whether a heat pump…

• room_heat_loss

  Calculate the design heat loss of a single room in watts, following BS EN 12831 as MIS 3005-D applies it. This is the figure a heat pump is sized from and the figure the radiator in that room must be able to deliver. BS EN 12831 is a…

• search_documents

  Search the guides, articles and questions for material on a UK home energy subject. Use this first, before answering from memory, whenever a question concerns UK heat pump or solar PV practice: how a system is sized, what a standard…

• solar_pv_output

  Estimate the annual AC electricity output of a UK solar photovoltaic system, in kWh, using the standard estimation method that MIS 3002 requires every MCS certified installer to use. The method is: annual output = kWp x Kk x SF, where Kk…

• solar_pv_self_consumption

  Estimate what proportion of a domestic solar PV system's annual output is consumed in the house and what proportion is exported, using the lookup tables in MGD 003. The tables are not a model. They come from half-hourly monitoring of real…

• solar_pv_shading

  Convert a completed MCS sunpath shading assessment into a shade factor, using the procedure in MGD 005. The MCS sunpath chart is divided into 84 segments, each worth one per cent of the year's useful irradiance. An assessor stands at the…

• solar_pv_system_size

  Work out the solar PV system a UK home needs: the capacity in kWp, the number of panels, the battery to go with it, and what it would do to the electricity bill. This runs the MCS arithmetic backwards. The other solar calculators here…

• com.ampworth/calculatorsresponde, 12 ferramentasverificado no registro MCP
• com.ampworth/documentsresponde, 3 ferramentasverificado no registro MCP