Servidor MCP de Dive Kit

• Nome no registroapp.divekit/mcpverificado no registro MCP

O nome no registro fica sob divekit.app. O registro só libera esse espaço de nomes para quem prova controle do domínio por DNS ou HTTP.

• Estadorespondeverificado em 2026-10-14
• Ferramentas18
• O servidor se chamadivekit-mcp
• Versão do servidor0.4.3
• Versão do protocolo2025-06-18

Em 2026-10-14 o servidor respondeu a initialize e tools/list sem login. Primeira resposta em 430 ms.

• plan_dive

  Computes the decompression plan for one dive, open circuit (OC) or closed-circuit rebreather (CCR): stop table, runtime, time to surface (TTS), gas used per cylinder, ascent pressure, CNS/OTU, gas density, warnings, contingencies, CCR…

• find_max_bottom_time

  Finds the longest whole-minute bottom time on one level of an open-circuit plan: the longest that keeps every cylinder at or above its reserve (limit reserve), whose time to surface fits a budget (limit tts), or that needs no stop (limit…

• check_no_deco

  Use this when the diver asks how long they can stay at a depth without decompression stops (no-deco limit, NDL, no-stop time). Returns the minutes left after the descent at GF high, the PPO₂ of the gas there and its MOD at 1.4 bar, a…

• read_share_link

  Decodes a Dive Kit share link (https://divekit.app/share/deco-plan/...) into the plan_dive input it carries: profile, gases, CCR rig, settings, custom contingencies, modifiers and repetitive tissue state, in the requested units. Use this…

• gas_specs

  Returns the facts for one breathing gas: maximum operating depth (MOD) at its Dive Kit PPO₂ band cap and at 1.4 bar, minimum depth for hypoxic mixes and, at a depth, PPO₂, equivalent narcotic depth (END), equivalent air depth (EAD) and…

• best_mix

  Use this when the diver asks what gas to breathe at a depth or which deco gases to carry: returns the richest bottom mix within a PPO₂ limit (default 1.4 bar) and an END limit (default 30 m, 98 ft), the nearest standard fill inside the…

• get_guide

  Returns one section of the Dive Kit planning guide as markdown. Use this when you need to explain a term, a warning or deco theory, or to check what a planning conversation needs: workflow, tool chains, every input with unit, default and…

• lookup_cylinders

  Returns scuba cylinders from Dive Kit's vetted open cylinder dataset: water volume, rated capacity, working pressure, material, typical use and, for five or fewer matches, weight, buoyancy and brands. Each row gives the plan_dive cylinder…

• lookup_certifications

  Returns diving certifications from Dive Kit's vetted open dataset of agencies and courses: prerequisites, equivalent courses at other agencies, depth and gas limits, notes and links. Use this when a diver asks what a course allows ("what…

• convert_units

  Converts one diving figure between units: pressure (bar, psi, MPa), volume (L, ft³), depth (m, ft), temperature (°C, °F, K), weight (kg, lb) and breathing rate (L/min, ft³/min, bar/min, psi/min). Use this when a diver gives a figure in…

• gas_usage

  Returns the gas one open-circuit cylinder spends over a planned profile: per segment the gas used (volume and pressure), what is left, the runtime and a status, plus the reserve, the turn pressure and the first segment that drops below…

• mix_result

  Returns the mix and pressure a cylinder ends with after gases are added in order: each addition's pressure and mix before and after, the cooling step, and the final O₂ %, He % and pressure. Use this when a diver or blender asks what a…

• plan_blend

  Returns a partial-pressure blending plan from what a cylinder holds to a target mix and pressure: bleed, helium, oxygen and top-up steps with the gauge pressure to stop at, the mix after each step, the cooling step, the mix achieved, the…

• blend_continuous

  Returns the settings for continuous-flow blending through a compressor intake: each feed gas's share of the intake flow, the analyzer readings to aim for after the first injection and at the end, and the pressure to bleed to first when…

• decant

  Returns what happens when two cylinders are joined with a transfill whip: the pressure both settle to, each cylinder's pressure and mix afterwards, and how much gas moved. With a target mix it also returns where to close the valve, the…

• rmv_sac

  Returns a diver's breathing rate measured from a logged dive: RMV (surface litres a minute, what plan_dive and gas_usage take) and SAC (pressure drop a minute on that cylinder), overall and per segment. Use this when a diver gives start…

• buoyancy_check

  Returns a weighting check for one rig: how much lead to add or remove to be neutral at the end of the dive, the net buoyancy at the start (full cylinders at the target depth) and the end (near-empty cylinders at 3 m), what a flooded…

• lookup_references

  Returns vetted references from Dive Kit's open references dataset, with links. Use this when a diver asks for a source. Call it before answering any question about deco theory, physiology, gas limits, blending practice, standards or…