MCP-сервер Aave Labs

• Имя в реестреcom.aave/mcpподтверждён в реестре MCP

Имя в реестре лежит в пространстве aave.com. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-16
• Инструменты53
• Сервер называет себяaave-mcp
• Версия сервера1.0.0
• Версия протокола2025-06-18

2026-10-16 сервер ответил на initialize и tools/list без входа. Первый ответ за 657 мс.

• get_chains

  List chains Aave supports, on v3, v4, or both. A chain carrying 'notServed': true is one this API holds no market on: every market, position and rewards read comes back empty for it, and that emptiness says nothing about the chain itself…

• get_markets

  List Aave markets/reserves (symbol, APY, caps, liquidity) on v3, v4, or both. Chain coverage: omit chainId and every response states the chains it read as 'chainsCovered', plus 'chainsNotCovered' when it read fewer than all of them…

• get_emode_categories

  v3 only. eMode groups correlated assets (ETH-correlated, stablecoins) so they borrow against each other at a higher LTV, raising borrowing power at the cost of restricting which assets the position may hold. Returns each market's…

• get_user_positions

  A wallet's Aave positions (supplies and borrows) on v3, v4, or both. Omit chainId and both versions cover every chain they serve, stating which under 'chainsCovered'; there is no need to loop over chains yourself. 'chainsNotServed', when…

• get_position_items

  v4 only. The individual supplies or borrows inside one v4 spoke: principal, accrued interest and what is withdrawable right now, per item, which the per-spoke aggregate from get_user_positions cannot show. Get 'spokeId' from…

• get_user_summary

  A wallet's aggregate position and health factor. Omit chainId and both versions cover every chain they serve, stating which under 'chainsCovered'; there is no need to loop over chains yourself. 'chainsNotServed', when present, lists…

• get_transaction_processed

  v4 only. After sending a transaction, ask whether the Aave API has processed it. Use this instead of sleeping or polling an RPC: the API lags the chain, and prepare_action will not issue a dependent follow-up (the supply after an…

• get_reserve_details

  Deep detail for a single reserve (rates, caps, risk parameters, utilisation, the interest-rate curve, token addresses) on v3 or v4. Every rate and percentage is a percent ('3.32' means 3.32%), named with a Pct suffix. On v4, utilisation…

• get_apy_history

  Historical supply or borrow APY for a reserve over time, on v3 or v4. Returns a time-series of {date, apyPct}, where apyPct is a percent ('3.32' means 3.32%). Each point is an average over its sampling interval, and the interval widens…

• get_user_activity

  A wallet's Aave transaction history (supply, borrow, repay, withdraw, collateral changes) on v3, v4, or both. Most recent first. v4 covers every chain; v3 reads one market on one chain at a time, because upstream paginates per market, so…

• get_protocol_history

  v4 only. Aave v4 protocol-wide history: market size, total borrows and available liquidity per sample over a window. Omit chainId to cover every supported v4 chain. Use this for 'is the protocol growing', not for one wallet…

• get_user_summary_history

  v4 only. How one wallet's net worth, supplied, debt and health factor moved over a window on Aave v4. Use it to answer 'how has my position changed' or to see how close to liquidation a wallet has been. Omit chainId to cover every…

• get_hubs

  v4 only. Aave v4 hubs: a hub holds the liquidity and global accounting that user-facing spokes draw from. Returns each hub's hubId, address, chain and totals. Pass a hubId to get_hub_assets for the assets it carries. Omit chainId to cover…

• get_hub_assets

  v4 only. The assets held by one Aave v4 hub, with hub-wide supplied and borrowed totals, rates and utilisation. Get hubId from get_hubs (or the hubAddress on get_reserve_details). This is hub-level accounting; for what a user can actually…

• get_market_history

  v4 only. Deposits, borrows, available liquidity and utilisation over a window, for one hub or one spoke. Pick the layer deliberately: a hub is the liquidity itself and answers 'is this market growing', a spoke is one venue onto that…

• get_asset_history

  v4 only. One asset across every v4 reserve that holds it: 'price' is its oracle price per sample, 'supply' and 'borrow' are the amounts plus the APY spread across those reserves (averageApyPct with the highest and lowest at that moment)…

• get_reserve_holders

  v4 only. The biggest wallets supplying or borrowing one v4 reserve, largest first, for questions about concentration: whether one address is most of a reserve's liquidity, or most of its debt. The token is named once for the whole list…

• get_interest_rate_model

  v4 only. The rate curve for one hub asset: borrow and supply APY at each level of utilisation, as points along the curve the protocol actually uses. This explains a rate rather than reporting it - where the kink sits, how steeply…

• get_wallet_balances

  v4 only. The tokens a wallet actually holds that v4 can take, per token and summed across chains, with 'perChain' saying where each sits, plus the best supply APY and lowest borrow APY the protocol currently offers on that token. This is…

• get_risk_premium

  v4 only. The per-collateral breakdown of one position's risk premium: how much of the position each token is, and the weight the protocol charges for it. 'currentRiskPremiumWeightPct' is the weight in force now and…

• get_spoke_configs

  v4 only. Per-asset limits for one (hub, spoke) pair: supply and borrow caps, whether the asset is active there, whether it is halted, and the risk premium threshold. Read it before sizing a large position, because a cap is what turns a…

• get_multichain_asset

  v4 only. One asset across every v4 chain at once, by symbol: what is supplied and borrowed on each, the rate on each, and a summary naming the best supply rate and the lowest borrow rate anywhere. This is the tool for 'where should I…

• prepare_liquidation

  Build an unsigned transaction to liquidate an unhealthy position: repay part of someone else's debt and receive their collateral plus the liquidation bonus. Only viable while that position's health factor is below 1 (check…

• prepare_set_emode

  v3 only. Build an unsigned transaction to switch a wallet's Aave v3 eMode category. eMode groups correlated assets (ETH-correlated, stablecoins) so they borrow against each other at a higher LTV, raising borrowing power at the cost of…

• prepare_action

  Build an unsigned transaction to supply, borrow, withdraw, or repay on Aave (v3 or v4). Returns an execution plan (a transaction to sign, or an approval step first). For a borrow or a withdraw, call preview_action first and read its…

• prepare_set_collateral

  Build an unsigned transaction to change whether a supplied asset is used as collateral (v3 or v4). On v4 'enable' sets the state; on v3 it toggles the current state, and a toggle that would invert a stated 'enable' is refused. The wallet…

• preview_action

  Simulate a supply/borrow/withdraw/repay against a wallet's position WITHOUT executing, on v3 or v4. Always do this before a borrow or a withdraw. Send only the arguments that apply: v4 takes 'reserveId'; v3 takes 'market' + 'token' +…

• get_swappable_tokens

  No version argument: token swaps are protocol-agnostic and run on the v4 backend, so they cover the chains that backend serves rather than every chain Aave has a market on. Call this before get_swap_quote to see where a swap can be…

• get_swap_quote

  No version argument: token swaps are protocol-agnostic and run on the v4 backend, so the chains and tokens they cover are that backend's and not every chain Aave holds a market on - a chain it does not serve is rejected outright rather…

• prepare_order

  No version argument: every order runs on the v4 backend. Which optional arguments apply is decided by the quote that minted the quoteId, so decide before emitting any: a quote that offered a 'bySignature' permit takes permitSignature +…

• submit_signed_order

  No version argument: every order runs on the v4 backend. Relay an order the user already signed (quoteId + signature from prepare_order's PreparedOrder). State-changing: this posts the order. The server never signs.

• prepare_cancel_order

  No version argument. From an orderId, return the EIP-712 cancellation for the user to sign; cancel_order relays the result. This is the gasless route for an intent order; an order that went on chain (a native-token sell) is cancelled with…

• cancel_order

  No version argument. Cancel an open order. Two routes: pass 'signature' (signed over what prepare_cancel_order returned) to relay a gasless cancellation - state-changing, and the route an intent order takes; omit 'signature' entirely for…

• get_order_status

  No version argument. Status of an order by id: open, pending signature, fulfilled, cancelled or expired, with the operation it performs and an explorer link. 'order' comes back null when the API cannot see that id, which a wrong id and a…

• get_pending_orders

  No version argument: orders run on the v4 backend, so this covers the chains that backend serves and names them under 'chainsCovered'; a chain under 'chainsNotCovered' could not be read and is worth asking about again. A wallet's orders…

• get_user_rewards

  A wallet's claimable Aave rewards on v3, v4, or both. Covers incentive programmes distributed through Merit as well as the protocol's own, so a GHO or sGHO incentive shows up here rather than anywhere separate. Omit chainId and both…

• prepare_claim_rewards

  v4 only. Build an unsigned transaction to claim a wallet's V4 rewards. If 'ids' is omitted, claims everything currently claimable. Non-custodial. There is no v3 equivalent because a v3 claim needs no second call: get_user_rewards already…

• get_sgho_vault

  v3 only, Ethereum only. Savings GHO (sGHO) is an ERC-4626 vault that pays a target rate on deposited GHO. Returns the vault's targetRatePct, totalAssets, supplyCap and paused flag; pass 'user' to add that wallet's shares, their GHO value…

• get_sgho_preview

  v3 only, Ethereum only. Convert between GHO and sGHO shares at the vault's current index, without building anything. Which unit 'amount' is in depends on the action: 'deposit' takes GHO and returns the shares it would mint; 'withdraw'…

• prepare_sgho_action

  v3 only, Ethereum only. Build an unsigned transaction to deposit GHO into the sGHO vault or withdraw from it. Non-custodial: the user's wallet signs and submits, so building one commits them to nothing. Choose sensible values, build it…

• prepare_stkgho_migrate

  v3 only, Ethereum only. Build an unsigned transaction that moves a wallet's stkGHO out of the Safety Module and into the sGHO vault. All-or-nothing: it covers the entire stkGHO position and takes no amount. Call get_safety_module with the…

• get_safety_module

  Aave's Safety Module, Ethereum only, and the one product here that is read from the contracts rather than the Aave API. Returns both generations: 'umbrella', the per-asset stake tokens securing the protocol now, each with its total…

• get_vaults

  v3 only. Name exactly one of 'user', 'owner' or 'vault', and read that sentence before choosing arguments: 'user' lists every vault that wallet holds shares in and is the portfolio question, 'owner' lists what one curator runs, 'vault'…

• get_vault_preview

  v3 only. Convert between a vault's assets and its shares at the current index, without building anything. Which unit 'amount' is in depends on the action, and this is the thing to get right: 'deposit' takes ASSETS and returns the shares…

• prepare_vault_action

  v3 only. Build an unsigned transaction to move value in or out of an Aave Vault. Non-custodial: the user's wallet signs and submits, so building one commits them to nothing - choose sensible values, build it, and say what you chose rather…

• get_vault_activity

  v3 only. How one wallet's position in one vault moved over a window: total yield earned, plus a per-sample breakdown of balance, deposits and withdrawals. Use it to answer 'what has this vault actually paid me', which the current APR…

• search_governance_proposals

  Takes no 'version' argument (DAO governance is not per-market; Governance V3 is unrelated to Aave v3/v4 markets). List or search Aave DAO governance proposals. Filter by 'state' to answer "what is live right now" (state 'active') or "what…

• get_governance_proposal

  Takes no 'version' argument (DAO governance is not per-market; Governance V3 is unrelated to Aave v3/v4 markets). Full detail for one Aave DAO governance proposal: state, author, vote tallies, quorum, timings and the transaction hash of…

• get_proposal_votes

  Takes no 'version' argument (DAO governance is not per-market; Governance V3 is unrelated to Aave v3/v4 markets). Who voted on an Aave DAO proposal and with how much power, largest voter first. Pass support=true or false to list only one…

• get_user_vote

  Takes no 'version' argument (DAO governance is not per-market; Governance V3 is unrelated to Aave v3/v4 markets). How one wallet voted on one Aave DAO proposal, and with how much power. Returns voted:false when that wallet did not vote…

• get_proposal_payloads

  Takes no 'version' argument (DAO governance is not per-market; Governance V3 is unrelated to Aave v3/v4 markets). What an Aave DAO proposal actually executes: one payload per target chain, each with its execution state, timelock delay…

• get_aave_guide

  Applies to both versions. Protocol and usage guidance for building Aave flows correctly. Read the relevant topic before constructing an action. Topics: overview, v4, v3, positions, health-factor, risks, ids, amounts, prices, signing…

• get_started

  Applies to both versions. What this Aave server can do: the tool families, the ready-made prompts, and the guide topics. Call this when an Aave conversation opens with no specific request and answer from it, rather than guessing from tool…