MCP-сервер Pixly

• Имя в реестреgg.pixly/mcpподтверждён в реестре MCP

Имя в реестре лежит в пространстве pixly.gg. Реестр пускает в такое пространство только того, кто доказал владение доменом через DNS или HTTP.

• Состояниеотвечаетпроверено 2026-10-30
• Инструменты44
• Сервер называет себяopenapi-mcp-server
• Версия сервера0.4.2
• Версия протокола2025-06-18

2026-10-30 сервер ответил на initialize и tools/list без входа. Первый ответ за 7556 мс.

• Делают ли инструменты работу продукта, ещё не проверено.
• Проверок пока 4 из 7, нужных, чтобы судить о надёжности.

Вывод сделан правилами по замерам выше. Вероятный первый вызов выбрала модель по списку инструментов: прочитайте описание, прежде чем на него полагаться.

• Оценка INITE MCPчерез неделюдля оценки нужно 7 ежедневных проверок, пока 4
• Отвечалидёт замерпроверок пока 4, долю покажем после 7
• Медиана первого ответа6057 мс
• Место в контексте агента≈ 14 121 токеновописания всех инструментов (44), они занимают контекст агента на каждом ходу
• Описания инструментовB · 86 из 100
• Типизированные ответы0 из 44 инструментовобъявлен outputSchema: ответ приходит с типами и читается сразу

• Параметры без описания: в 37 из 44

Программа проверяет сервер раз в день: initialize и tools/list, без модели. Токены - это длина описаний из расчёта примерно четыре символа на токен. Оценка - среднее шести проверок имени, описания, схемы и аннотаций каждого инструмента. Она говорит, насколько понятно описаны инструменты, а не о том, работают ли они. Оценка складывается только из замеренного: отвечает ли сервер (25%), делает ли работу продукта (25%), описания (20%), контекст (10%), использование (10%) и насколько просто подключиться (10%). Незамеренная часть не учитывается, а скрытая инструкция ограничивает оценку 40 баллами. Состояние MCP-серверов вендоров: методика и цифры →

• getBedrockRange

  Returns the Java version range Bedrock players can join, for fabric, neoforge and spigot (Paper and its forks); an empty string means unknown. Check it before enabling config.bedrockEnabled.

• listBills

  Lists past calendar months' bills, newest first, each with its cost per server. status pending means the month is closed but its bill is not final yet. Match each serverId to a name with listServers; a deleted server no longer appears…

• getMonthSpending

  Breaks this calendar month's spend so far down by server: cost, compute cost and time awake. Match each serverId to a name with listServers and name servers by that name. For the total and the balance use getBalance.

• getLoaderVersions

  Lists the Minecraft versions each config.type can run, keyed by type. Use it before createServer or updateServer to choose config.version. VANILLA is omitted because it runs every version; a missing type means its list is unavailable.

• getPricingCatalog

  Returns estimated monthly prices in US cents, as the site shows them, for every available region and size under three play schedules (casual, regular, evenings), plus always-on host references when available. Name each size by its…

• listServers

  Lists the account's servers with id, name, join address, region, size, settings, state and recent disk, memory and lag figures. runtime.loadCause, when present, says why a server keeps lagging with players on: memory (garbage collection)…

• createServer

  Creates a server, asleep and free until startServer or a joining player wakes it, and returns it with its id and join address. Region sets player latency and cannot change later: ask where players are if unknown; regions and size prices…

• deleteServer

  Permanently deletes the server with its world, settings, backups and exports, shutting it down if running. Call it only for a server the user named in this request, one server per call; for a request that names none or covers several…

• updateServer

  Changes a server's name, size, settings, player lists, content, auto-start or custom domain. Omitted fields are kept, and a sent list replaces the stored one (uploaded files excepted). Not for the resource pack (setResourcePack) or a…

• startAssetUpload

  Only for an assistant that can send the user's file with HTTP PUT, such as a coding agent with a shell. Begins uploading one .jar or .zip mod, plugin, datapack or resource pack (up to 512 MiB, storage capped per server and account) and…

• abortAssetUploads

  Discards one or more (up to 50) unfinished or inspected uploads. Returns aborted and leftover. Installed files are removed with deleteAsset.

• completeAssetUploads

  Installs one or more (up to 50) files from startAssetUpload calls; resource packs go through setResourcePack. Files failing a check are returned in rejected with key and error; the rest apply at the next restart.

• inspectAssetUpload

  Completes a startAssetUpload and reports its kind, size and metadata without installing it. To install, pass it to completeAssetUploads, or setResourcePack with its key for a resource pack; abortAssetUploads discards it.

• deleteAsset

  Uninstalls a custom mod, plugin or datapack file that was uploaded to the server and deletes the file, taking effect at the next restart. The file can only be recovered from a backup.

• listBackups

  Lists backups newest first with backupId, startTime, sizeBytes, reason (daily, manual, upload, freeze, reset, config-change) and exportState (idle, exporting, ready). Pass backupId to restoreBackup, cancelBackupRestore, startBackupExport…

• createBackup

  Takes a manual backup of the server's current world, which can later be restored or exported. Fails while the server is starting, stopping or restoring, before its first boot, or when the account balance is too low. Returns the backup as…

• deleteBackup

  Permanently deletes one backup; this cannot be undone. A backup that is queued for restore or being exported cannot be deleted. For the only remaining copy of a world the call is refused with requiresConfirmation; ask the user, then…

• getBackupDownloadUrl

  Returns a signed link, valid for 6 hours, to download a backup exported with startBackupExport. Fails if the export is not ready yet; requires a paid account. Returns url (a .tar.gz for the user) and expiresAt.

• deleteBackupExport

  Deletes the downloadable archive made by startBackupExport. The backup itself is kept and can be exported again.

• startBackupExport

  Packages a backup into a downloadable archive. Requires a paid account and balance; refused while another upload, export or restore is pending (at most 3 per account). Poll listBackups until exportState is ready, then call…

• cancelBackupRestore

  Cancels a restore from restoreBackup that an online server has not applied yet. Pass the queued backupId. Fails if nothing is queued for it or it is already being applied.

• restoreBackup

  Replaces the whole world with the chosen backup. No backup of the current world is taken, so everything since that backup is lost unless you run createBackup first. An asleep server restores at once; an online server applies it at the…

• getConsoleLogs

  Returns up to 200 recent console lines, including startup, oldest first. Use it to see why a server failed to start or what happened in game; it cannot run commands. Returns events, nextCursor (newer) and prevCursor (older); platform…

• verifyCustomDomain

  Looks up the public DNS record of the custom domain set with updateServer customDomain and updates its status; use it after the user changes DNS. A record that points at the server verifies the domain and starts routing players to it. A…

• dismissJoinAttempt

  Clears the notice for a player the whitelist turned away; it does not whitelist, kick or ban. To let them in, add them to whitelist with updateServer. Returns the server.

• keepServerAwake

  Delays a running server's idle sleep by 5 minutes from now; it keeps being charged meanwhile. Use it while working on a server with no players online; to wake an asleep server use startServer. Fails with 409 if not running. Returns sleepAt.

• getServerMetrics

  Returns the server's load samples over the last minutes (default 30, up to 360), oldest first, one about every 30 seconds while it runs. Each point has its time, memory use, tick load in permille (divide by 20 for milliseconds per tick…

• deleteModpack

  Uninstalls the server's uploaded custom modpack and deletes the file, taking effect at the next restart. The world is kept, though the server may then suggest a world reset to clear content the pack left behind.

• startModpackUpload

  Only for an assistant that can send the user's file with HTTP PUT, such as a coding agent with a shell. Begins uploading a Modrinth .mrpack (up to 1 GiB). Returns uploadId, key, fileName and parts (url valid one hour): PUT each piece…

• abortModpackUpload

  Cancels an unfinished, or checked but not yet installed, modpack upload and discards the file. An installed modpack is not affected; remove it with deleteModpack.

• completeModpackUpload

  Installs the .mrpack as the server's modpack, replacing loader, version and mods at the next restart; a backup is taken first. Pass uploadId, key and each ETag. Returns the server.

• inspectModpackUpload

  Completes a startModpackUpload and returns its version, loader and contents without installing. To install, call completeModpackUpload with the same arguments; abortModpackUpload discards it.

• resetServer

  Replaces the world with a fresh one, keeping settings, content and address; for an earlier world use restoreBackup instead. A running server disconnects its players and comes back online on the new world. A reset backup of the current…

• setResourcePack

  Sets the resource pack players are offered on join, from Modrinth, an uploaded .zip or a link; from: none removes it. It applies at the next restart (restartToApplySettings). Make it mandatory with resourcePackRequired in updateServer…

• restartServer

  Reboots a running server's machine; players are disconnected for a minute or two while it boots and fetches its content from Modrinth, CurseForge or their download links. Use it for a pending size change or a stuck server; for changed…

• restartToApplySettings

  Restarts only the Minecraft program on an online server so changed settings apply; players drop for a few seconds while it reloads content from Modrinth, CurseForge or their download links. Use it when the server reports a restart is…

• startServer

  Wakes an asleep server so players can join it from the internet at its address; not for an online server (use restartServer). While booting it fetches its mods, plugins and modpack from Modrinth, CurseForge or their download links, and a…

• stopServer

  Shuts a running server down so it sleeps, disconnecting players and ending running charges; world and settings are kept. For a reboot use restartServer. While autoStartEnabled is on, a joining player wakes it (turn off with updateServer)…

• startWorldUpload

  Only for an assistant that can send the user's file with HTTP PUT, such as a coding agent with a shell. Begins uploading a world archive (.zip, .tar.gz, .tgz; up to 4 GiB). Returns jobId, uploadId, key and parts (partNumber, url valid one…

• abortWorldUpload

  Cancels an unfinished world upload and discards the parts uploaded so far. The server's current world is not affected. Only before completeWorldUpload.

• completeWorldUpload

  Call after every piece is uploaded, with jobId, uploadId, key and each ETag. The current world is not changed: the archive is imported in the background (minutes) into a new backup with reason upload in listBackups. To play it, run…

• refreshWorldUploadParts

  Returns new one-hour links for pieces of a startWorldUpload whose links expired. Pass jobId, uploadId, key and the pieces still to upload.

• getServerUsage

  Returns the time the server spent with at least one player online in its latest unbroken run on its current size (its last 7 days with players, or more days back until they hold 8 hours), histograms of CPU, tick load, GC pause share…

• getBalance

  Shows the signed-in user's balance, this month's spend so far and projected total, and what awake servers cost per hour. Call it when the user asks about their balance or spending. It cannot add funds. When the user asks to add funds…